# Wanted: VRM Automatic Alarm Monitoring Threshold Values

**URL:** <https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243>\
**Category:** DIY\
**Tags:** vrm, multiplus-ii, diy, ess\
**Created:** [21 March 2026 10:10 UTC](https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243 "2026-03-21T10:10:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MSl1](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/msl1/32/41078_2.png) [@MSl1](https://community.victronenergy.com/u/MSl1)\
**Post date:** [21 March 2026 10:10 UTC](https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243/1 "2026-03-21T10:10:22Z")

</div>

**WHERE** can the specific threshold values ​​for the _Automatic Alarm Monitoring_ be found?

 ![Screenshot_20260321-105653 (1)](https://europe1.discourse-cdn.com/victron/original/3X/6/c/6c605d8cd77ffe142619ebef419d9b8d4e9f9556.png)

 ![Screenshot_20260321-105645 (1)](https://europe1.discourse-cdn.com/victron/original/3X/b/5/b52eaf035fbda78267524a132f1574f32d004e9c.png)

---

<div class="post-metadata">

**Author:** ![dognose](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/dognose/32/968_2.png) [@dognose](https://community.victronenergy.com/u/dognose)\
**Post date:** [21 March 2026 12:16 UTC](https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243/2 "2026-03-21T12:16:25Z")

</div>

I don’ think these are configurable. What is a “low voltage” and “high voltage” is derived from the operational parameters.

Probably the settings in VEConfigure will impact that, as low/high voltage alerts are generated by the inverter, not by the gx. (Gx just reads it and passes that information on to VRM)

Alerts generated by any BMS itself are triggered by thresholds configured in the BMS as well.

---

<div class="post-metadata">

**Author:** ![MSl1](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/msl1/32/41078_2.png) [@MSl1](https://community.victronenergy.com/u/MSl1)\
**Post date:** [21 March 2026 12:30 UTC](https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243/3 "2026-03-21T12:30:43Z")

</div>

> [@dognose](#):
>
> I don’ think these are configurable.

I don’t want to change these values. I’m ONLY interessted for the real values. 😉

---

<div class="post-metadata">

**Author:** ![dognose](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/dognose/32/968_2.png) [@dognose](https://community.victronenergy.com/u/dognose)\
**Post date:** [21 March 2026 12:39 UTC](https://community.victronenergy.com/t/wanted-vrm-automatic-alarm-monitoring-threshold-values/55243/4 "2026-03-21T12:39:50Z")

</div>

Ah, okay 🙂

Well, that I don’t know unfortunately.