# VRM Remote Console - Missing Relay 2 switch

**URL:** <https://community.victronenergy.com/t/vrm-remote-console-missing-relay-2-switch/50385>\
**Category:** Q&A and troubleshooting\
**Tags:** gx\_device, beginner, vrm, multiplus-ii\
**Created:** [18 December 2025 21:18 UTC](https://community.victronenergy.com/t/vrm-remote-console-missing-relay-2-switch/50385 "2025-12-18T21:18:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Enzo68](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/enzo68/32/33029_2.png) [@Enzo68](https://community.victronenergy.com/u/Enzo68)\
**Post date:** [18 December 2025 21:18 UTC](https://community.victronenergy.com/t/vrm-remote-console-missing-relay-2-switch/50385/1 "2025-12-18T21:18:51Z")

</div>

Hi,

I’d like to know if the VRM remote console behavior is correct or not.  
As you can see in the image below, the status of relay #2, which is configured on temperature sensor, is not visible.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/9/991e19a218ed252358c2bc71074bae673f343b43.png)

In the picture below you can see both the settings for relay #1 which works correctly based on battery SOC, and the settings for relay #2 which runs some fans based on temperature.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/f/a/fabeb1780597352d4cd8012afdcd33bd0bb4f437.png)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/7/c/7c181bfba12eafedfd58bba003a8f08186e03bc3.png)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/b/6/b672a3abac25f94498df9184261279d3bedd0bd2.png)

I restarted the CerboGX many times hoping it would fix the issue, but had no success.  
I don’t know what I am missing or maybe I found some kind of bug in the VRM remote console layout.

Any help would be appreciated

Kind regards  
Enzo

---

<div class="post-metadata">

**Author:** ![MikeD](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/miked/32/1522_2.png) [@MikeD](https://community.victronenergy.com/u/MikeD)\
**Post date:** [20 December 2025 00:24 UTC](https://community.victronenergy.com/t/vrm-remote-console-missing-relay-2-switch/50385/2 "2025-12-20T00:24:22Z")

</div>

I get the same, depending on the relay setting. Apart from the genset start / stop, the relay controls only appear when set to manual. Anything else, they disappear. This is not a function of VRM, but more GUI2,or venus itself.

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/victron/original/1X/21a9a7b5db7c6339715f993568736a7053199995.png) [@system](https://community.victronenergy.com/u/system)\
**Post date:** [3 January 2026 00:25 UTC](https://community.victronenergy.com/t/vrm-remote-console-missing-relay-2-switch/50385/3 "2026-01-03T00:25:10Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.