# VRM Release Notes 20-05-2026

**URL:** <https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221>\
**Category:** Q&A and troubleshooting\
**Tags:** release\_notes, dess, beginner, victronconnect, vrm\
**Created:** [20 May 2026 10:11 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221 "2026-05-20T10:11:51Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Barbara](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/barbara/32/1215_2.png) [@Barbara](https://community.victronenergy.com/u/Barbara)\
**Post date:** [20 May 2026 10:11 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/1 "2026-05-20T10:11:51Z")

</div>

Hi everyone!

We have just released a lot of improvements to VRM, so let me guide you through them 🙂 . There’s a lot, so grab a coffee and sit back.

**New**  **Features**

- **Switches** are now controllable in VRM from the site’s dashboard

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/9/99640759ffd8ab0be26b633ede12c4d3d8df29a1.png)

- **Installation**  **Group**  **Dashboard** — Installation groups now have their own dashboard, giving you an at-a-glance overview of all sites in the group: active alarms, production and consumption per site, battery state of charge, and a combined event log.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/4/94fa088da852c13d2d355bd1f7401dc18369e882.png)

- **Team**  **Access**  **via**  **Shareable**  **Link** — Team admins can now generate a shareable link that site owners can use to grant that team access to their site. This is especially useful for service centers: share the link with your customers, and they can add your team to their site themselves: choosing which sites to share and at what access level.

 ![Screenshot 2026-05-20 at 12.00.50](https://europe1.discourse-cdn.com/victron/original/3X/7/b/7b8461dbf4059968a945ff1762c283fded950ed1.png)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/b/4/b43373b7d149e8d8d58cffd6e4b5910c87ceb429.png)

- **Firmware**  **Release**  **Notes** — When you expand a firmware update on the Firmware updates page, you can now read the release notes for that version.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/5/9/595a6ba8b9c932fdbf91dbebddfe92b627a26ef6.png)

- **EV**  **Charging**  **Reports** — We have extended the EVCS report, to show your charging sessions along with a breakdown of energy sources (solar, battery, or grid) and the associated charging costs (if you use Dynamic ESS)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/6/7/671130b983f1b194a3c6630961cf3dc337a70578.png)

**Improvements**

- **Tags**  **Dropdown**  **Restored** — When adding a tag to a site, the input field now shows a dropdown of tags you’ve already used on your other sites. This helps you stay consistent and avoid typos.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/4/9/49e9f06d08b800a4f4db6fe3ac1e806583e5217b.png)

- **Notification**  **Settings**  **Link**  **on**  **Alarm**  **Rules**  **Page** — The user permissions table on the alarm rules page now includes a direct link to notification settings, so you can quickly configure how you want to be notified.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/7/b/7b553b34d9a9d02fa831905b27dbbef4318ae9e3.png)

- **Your**  **User**  **Highlighted**  **in**  **Alarm**  **Permissions** — On the alarm rules page, your own account now appears at the top of the permissions table with a “(you)” label, making it easy to find and adjust your own settings.

- **Navigate**  **from**  **Alarm**  **Logs**  **to**  **Alarm**  **Rules** — The alarm logs page now includes a link to the alarm rules page, so you can quickly adjust alarm settings based on what you see in the logs.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/8/5/856d322c03d4f8841cf4df262f9943e0746eff36.png)

- **Dashboard**  **Note**  **for**  **Clamped**  **Negative**  **Prices** — When energy prices are negative and values are clamped, the dashboard now displays a note explaining this, so you understand what the displayed prices represent.

- **Smarter**  **"Open**  **in**  **VictronConnect"**  **Buttons** — The “Open in VictronConnect” buttons on the Device list are now shown only for devices that actually support it, based on the device’s VregLink attribute.

- **Improved**  **Date**  **Selection**  **on**  **Mobile** — The datepicker is now more touch-friendly on mobile devices, with larger tap targets and a better-scaled layout to prevent misclicks.

**Bug**  **Fixes**

- **Consumption**  **Forecast**  **Toggle** — Fixed an issue where toggling consumption forecasts on or off caused the entire graph to refresh unnecessarily.

Some of these features were suggested by community members, so thank you for being so involved and pro-active in thinking along on how to make VRM better.

If you have any feedback on the features above, please mention them here. For new requests or bugs, please start a new thread, as to not dilute this thread too often. 🙏

---

<div class="post-metadata">

**Author:** ![Barbara](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/barbara/32/1215_2.png) [@Barbara](https://community.victronenergy.com/u/Barbara)\
**Post date:** [20 May 2026 11:45 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/2 "2026-05-20T11:45:56Z")

</div>

Pinned on 20 May 2026 11:45 UTC



---

<div class="post-metadata">

**Author:** ![Mike.S](https://avatars.discourse-cdn.com/v4/letter/m/f08c70/32.png) [@Mike.S](https://community.victronenergy.com/u/Mike.S)\
**Post date:** [20 May 2026 12:28 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/3 "2026-05-20T12:28:49Z")

</div>

> [@Barbara](#):
>
> - **Switches** are now controllable in VRM from the site’s dashboard
> 
> ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/9/99640759ffd8ab0be26b633ede12c4d3d8df29a1.png)

How is that accessed? It looks like a pop out window (it has a close box), but there’s nowhere obvious on the Dashboard to open it.

---

<div class="post-metadata">

**Author:** ![M\_Lange](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/m_lange/32/16_2.png) [@M\_Lange](https://community.victronenergy.com/u/M_Lange)\
**Post date:** [20 May 2026 12:30 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/4 "2026-05-20T12:30:50Z")

</div>

![grafik](https://europe1.discourse-cdn.com/victron/original/3X/e/d/edfcc04c3fdc21ddb66a8b653f43606214f1490e.png)

---

<div class="post-metadata">

**Author:** ![Barbara](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/barbara/32/1215_2.png) [@Barbara](https://community.victronenergy.com/u/Barbara)\
**Post date:** [20 May 2026 12:31 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/5 "2026-05-20T12:31:19Z")

</div>

You’ll find it next to the ‘controls’ icon:

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/f/a/fa80d0274779cc777117241b1544c064d83b2480.png)

Note that this only shows when you have controllable switches in your devices.

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [20 May 2026 12:33 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/6 "2026-05-20T12:33:12Z")

</div>

> [@Barbara](#):
>
> Note that this only shows when you have controllable switches in your devices.

And a realtime connection.

---

<div class="post-metadata">

**Author:** ![Mike.S](https://avatars.discourse-cdn.com/v4/letter/m/f08c70/32.png) [@Mike.S](https://community.victronenergy.com/u/Mike.S)\
**Post date:** [20 May 2026 12:47 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/7 "2026-05-20T12:47:06Z")

</div>

> [@Barbara](#):
>
> Note that this only shows when you have controllable switches in your devices.

Excluding virtual switches from Node Red, apparently? I have switches shown in Remote Console which aren’t present in VRM.

> [@nickdb](#):
>
> And a realtime connection.

BINGO!

---

<div class="post-metadata">

**Author:** ![Jeroen2](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/jeroen2/32/7234_2.png) [@Jeroen2](https://community.victronenergy.com/u/Jeroen2)\
**Post date:** [20 May 2026 12:53 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/8 "2026-05-20T12:53:36Z")

</div>

Update to latest FW of the GX maybe?

Greetz

---

<div class="post-metadata">

**Author:** ![Mike.S](https://avatars.discourse-cdn.com/v4/letter/m/f08c70/32.png) [@Mike.S](https://community.victronenergy.com/u/Mike.S)\
**Post date:** [20 May 2026 13:27 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/9 "2026-05-20T13:27:14Z")

</div>

> [@Jeroen2](#):
>
> Update to latest FW of the GX maybe?

Yes, and no. I upgraded when trying to get the switches to show up, but didn’t wait long enough for Node Red to start up fully.

---

<div class="post-metadata">

**Author:** ![Jeroen2](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/jeroen2/32/7234_2.png) [@Jeroen2](https://community.victronenergy.com/u/Jeroen2)\
**Post date:** [20 May 2026 13:59 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/10 "2026-05-20T13:59:30Z")

</div>

Ok, @Mike.S, Node red is officially not fully supported yet (it’s still in a sort of BETA, not even that), and Barbara is of course showing “normal” VRM users the new things, what you do in Node-red can work and it also cannot, pending, for my customers/installs (I checked all of them just now)…all works just fine…not one with an issue, bugs…I couldn’t find one in such short time (the last 3 hours), thank you @Barbara very much, we like it, way more easy to visualise things and way more easy access to things to operate and/or to see, keep it up…

Regards, Jeroen.

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [20 May 2026 16:16 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/11 "2026-05-20T16:16:11Z")

</div>

@Mike.S  
It is possible to set it .

 ![WA1779293728421](https://europe1.discourse-cdn.com/victron/original/3X/a/1/a17c6e63022df74c69fa847a4c64035344bf8c47.jpeg)

---

<div class="post-metadata">

**Author:** ![Diesels](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@Diesels](https://community.victronenergy.com/u/Diesels)\
**Post date:** [24 May 2026 06:42 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/12 "2026-05-24T06:42:26Z")

</div>

Is this not released on OiS? Appstore only shows 3.0.32 from 1mo ago.

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [24 May 2026 06:45 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/13 "2026-05-24T06:45:05Z")

</div>

This is the portal release notes, not the app. The app doesn’t have any real functionality beyond mobile widgets, it is a gateway to the portal.

---

<div class="post-metadata">

**Author:** ![RY\_DE](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@RY\_DE](https://community.victronenergy.com/u/RY_DE)\
**Post date:** [25 May 2026 15:19 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/14 "2026-05-25T15:19:22Z")

</div>

Hi, I am sorry if I am missing something obvious. What version firmware do I need to have to get all this functionality. My VRM looks completely different and basic. CerboGX is running v2.92. Thank you

---

<div class="post-metadata">

**Author:** ![M\_Lange](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/m_lange/32/16_2.png) [@M\_Lange](https://community.victronenergy.com/u/M_Lange)\
**Post date:** [25 May 2026 16:21 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/15 "2026-05-25T16:21:01Z")

</div>

2.92 is over 3 years old, of course you don’t get all new features with a FW that old.  
The newest version is 3.73 and is around two weeks old.

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [25 May 2026 16:22 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/16 "2026-05-25T16:22:11Z")

</div>

Update to the current gx version. Yours is very very far behind. Please check all the other device firmware first to make sure it’s compatible.

---

<div class="post-metadata">

**Author:** ![tabi](https://avatars.discourse-cdn.com/v4/letter/t/ec9cab/32.png) [@tabi](https://community.victronenergy.com/u/tabi)\
**Post date:** [26 May 2026 18:53 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/17 "2026-05-26T18:53:01Z")

</div>

How do we add an installation group. This is something I’ve been wanting for ages to stop toggle long between two systems

---

<div class="post-metadata">

**Author:** ![Barbara](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/barbara/32/1215_2.png) [@Barbara](https://community.victronenergy.com/u/Barbara)\
**Post date:** [27 May 2026 18:06 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/19 "2026-05-27T18:06:12Z")

</div>

Hi!

You can create one here: [VRM Portal - Victron Energy](https://vrm.victronenergy.com/groups)

Then add your 2 sites (or more) to it. On the group page, there’s a button ‘Go to group dashboard’ 🙂

Have fun!

---

<div class="post-metadata">

**Author:** ![AlanW](https://avatars.discourse-cdn.com/v4/letter/a/ebca7d/32.png) [@AlanW](https://community.victronenergy.com/u/AlanW)\
**Post date:** [21 July 2026 20:11 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/20 "2026-07-21T20:11:34Z")

</div>

Hi

Not sure why but whenever I upgrade VRM above version 3.67 I loose my output relay control in both Dashboard and Console. I use the output relays control my ESS scheme. Appreciate any help.

Thanks

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [21 July 2026 20:15 UTC](https://community.victronenergy.com/t/vrm-release-notes-20-05-2026/58221/21 "2026-07-21T20:15:37Z")

</div>

> [@AlanW](#):
>
> whenever I upgrade VRM above version 3.67

You can’t upgrade VRM, it is a cloud portal. You can upgrade your venus OS, depending on the type of GX you have.
