VRM Notifier alert (VE.Bus System [0], Temperature L1: Warning) issued & cleared within 1 minute

DIY
, , ,
1

I’ve just started received multiple email alerts (6-12) per day while running generator (underway or at anchor). These are cleared almost immediately per a follow-up email (time stamped the same minute or the next minute after the alert email). See email subject & texts below. What should I learn and fix based on these notifications?

WARNING EMAIL SUBJECT AND TEXT:

ALERT - ‘Tennie Ann’: ‘Temperature L1’ on ‘VE.Bus System [0]’

VE.Bus System [0], Temperature L1: Warning

CLEARED EMAIL SUBJECT AND TEXT:

CLEAR - ‘Tennie Ann’: ‘Temperature L1’ cleared on ‘VE.Bus System [0]’

VE.Bus System [0], Temperature L1 changed from ‘Warning’ to ‘Ok’

2

Its probably charging and the inverter is getting hot, the temperature is hovering around the outside of what the warning is triggered at.

Add some fans or something to the compartment where the inverter is to help clear the heat build up around the inverter.

Also chrck for loose terminals or anything else that may be blocking air flow through the inverter