# View of multiple MPPTs yield in Cerbo

**URL:** <https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575>\
**Category:** DIY\
**Tags:** cerbo\_gx, mppt\_controllers, feature-request, cerbo-gx\
**Created:** [12 August 2026 11:08 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575 "2026-08-12T11:08:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![torrmundi](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/torrmundi/32/55422_2.png) [@torrmundi](https://community.victronenergy.com/u/torrmundi)\
**Post date:** [12 August 2026 11:08 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575/1 "2026-08-12T11:08:44Z")

</div>

In the Overview\>Solar yield view, Cerbo GX provides a table view of all the MPPT controllers’ current status. If you select any single MPPT, you can see the history of that MPPT. But nowhere is there a history view of all the MPPT controllers, for selected time periods.

It would be great for diagnostic purposes of solar panels & MPPTs if the Overview\>Solar yield page had a History - Chart/Table view that showed the yields per MPPT for selected periods (Today, Yesterday, Last 7, Last 14, Last 31). This would allow comparisons at a glance.

I have 9 MPPTs connected with VE.Direct to USB adapters to a USB Hub, then to the Cerbo GX USB input.

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [12 August 2026 13:23 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575/2 "2026-08-12T13:23:29Z")

</div>

You can do this with VRM and custom widgets.

Or, even with nodered charts and dashboards, which are locally accessible.

---

<div class="post-metadata">

**Author:** ![torrmundi](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/torrmundi/32/55422_2.png) [@torrmundi](https://community.victronenergy.com/u/torrmundi)\
**Post date:** [12 August 2026 15:08 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575/3 "2026-08-12T15:08:54Z")

</div>

thanks! I’ve not yet delved into NodeRed and dashboards. VRM Portal requires me to fire up the PC, but yeah, would work.

---

<div class="post-metadata">

**Author:** ![Brucey](https://avatars.discourse-cdn.com/v4/letter/b/ccd318/32.png) [@Brucey](https://community.victronenergy.com/u/Brucey)\
**Post date:** [12 August 2026 16:55 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575/4 "2026-08-12T16:55:54Z")

</div>

Very easy to configure in VRM advanced charts (I have more sccs than shown in chart so numbers wont match yield)

 ![Screenshot_20260812_125402_VRM](https://europe1.discourse-cdn.com/victron/original/3X/f/f/ffefa26e6f93a6334efa88aace9287e0539946b3.jpeg)

 ![Screenshot_20260812_125428_VRM](https://europe1.discourse-cdn.com/victron/original/3X/2/d/2d37589c06adaf96f96f2498fb42f1fb1a53c956.jpeg)

---

<div class="post-metadata">

**Author:** ![torrmundi](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/torrmundi/32/55422_2.png) [@torrmundi](https://community.victronenergy.com/u/torrmundi)\
**Post date:** [13 August 2026 19:27 UTC](https://community.victronenergy.com/t/view-of-multiple-mppts-yield-in-cerbo/61575/5 "2026-08-13T19:27:32Z")

</div>

there’s a max limit of 6 traces per widget, so I have to use two widgets!