# Victron system using a Felicity FLB48314TG battery, a MultiPlus 48/5000/70-100, and a Venus GX

**URL:** <https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213>\
**Category:** DIY\
**Tags:** felicity-solar, lithium\_battery, diy\
**Created:** [20 May 2026 07:49 UTC](https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213 "2026-05-20T07:49:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![CCB](https://avatars.discourse-cdn.com/v4/letter/c/ccd318/32.png) [@CCB](https://community.victronenergy.com/u/CCB)\
**Post date:** [20 May 2026 07:49 UTC](https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213/1 "2026-05-20T07:49:16Z")

</div>

Hello,  
I am setting up a Victron ESS system using a Felicity FLB48314TG battery, a MultiPlus 48/5000/70-100, and a Venus GX.  
I have already prepped the proper CAN-bus cable for communication, but I cannot find the official guidelines for the VE.Configure settings. Could anyone share the correct parameters for this specific battery? I am looking for the proper Sustain voltage, Dynamic Cut-off voltages, Restart offset, Charger settings (Absorption/Float), and the rest of it.  
Any documentation or proven values would be highly appreciated, thank you.

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [20 May 2026 15:49 UTC](https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213/2 "2026-05-20T15:49:46Z")

</div>

> [@Communication between Cerbo GX & Felicity LiFePo battery](https://community.victronenergy.com/t/communication-between-cerbo-gx-felicity-lifepo-battery/28903/2):
>
> There is a person for direct line of support on this thread. You won’t be programming ess assistant on the multi rs. But the rest should be the same.

I added the tag for felicity if you click it there are a few threads about their battery use.

---

<div class="post-metadata">

**Author:** ![CCB](https://avatars.discourse-cdn.com/v4/letter/c/ccd318/32.png) [@CCB](https://community.victronenergy.com/u/CCB)\
**Post date:** [20 May 2026 16:59 UTC](https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213/3 "2026-05-20T16:59:51Z")

</div>

Thank you for this. I had already read that threads, but I was wondering whether the battery model also affects the settings. I assume it probably does, but I’m not sure, that’s why I asked.

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [20 May 2026 19:41 UTC](https://community.victronenergy.com/t/victron-system-using-a-felicity-flb48314tg-battery-a-multiplus-48-5000-70-100-and-a-venus-gx/58213/4 "2026-05-20T19:41:34Z")

</div>

Use the document, if you have an issue, then as Angie-Felicity using the @…