Hello everyone, I’m using Home Assistant 17.1 and have added Victron Remote Monitoring as an integration/service. However, I only see 18 entities, all of them under these categories: Estimated Energy Consumption Estimated Energy Production Highest Consumption Peak Highest Peak Time I…

Thanks, do you know the names or Adress from this Sensors? and from this: [image] [image]

“aus dem Netz” is not a plain sensor. In HA can this constructed via reading of energy values from the energy meter (VM3 modbus or grid meter mqtt), put this into a HA “energy meter” and the build your own display parameters, last hour, week, month aso. “von der Batterie” as the same way. Here rea…

this pr: https://github.com/home-assistant/core/pull/156090 was just merged, so I assume an official victron mqtt integration is comming to the next HA release. This will probably be limited to just a few sensors, given HA’s policy to only add a few things at a time in a new PR, but I expect steady …

The new built in integration contains all the entities from the custom one other than the reboot Cerbi button which will be added in the next HA version.

Victron integration now released into core HA

Cool. Thanks for letting us know. I’m not an HA expert at all, so pardon the stupid question that follows. I have installed the MQTT custom integration that I installed via HACS. But now I don’t see it listed as in the HACS section on my HA server/hub. Do I just update the core and OS and that’s it?…

Nevermind. It just worked. Thanks.

Just had set-up a new system (inverter, battery and Color GX) and integration into HA is seamless. Just enable MQTT on the display and install the official Victron integration. All 3 devices appeared with many entities. The display device exposed lots of unneeded and unused entities, so I disabled i…

You could try the integration from HACS the official one is based on: GitHub - tomer-w/ha-victron-mqtt: Home Assistant Victron GX integration based on MQTT · GitHub According to tomer-w he intends to continue to support this one in parallel - it does have a configurable interval.

Victron integration in Home Assistant

Modifications

drs68 (Derek) May 8, 2026, 2:45pm 11

Hey Tomer, isn’t the official non HACS version also missing the ability to use mosqitto and also the ability to specify the update frequency? Or did I miss something?

The Victron GX integration arrived in Home Assistant

Topic		Replies	Views
Victron Integrationen in Home Assistant und Sensoren Deutschsprachiger Bereich vrm , cerbo_gx	10	373	March 20, 2026
Homeassistant "Victron GX modbusTCP integration" - Tipps und Tricks gesucht Deutschsprachiger Bereich	20	7779	June 29, 2025
Victron VRM API Integration für Home Assistant Deutschsprachiger Bereich pv_inverter , vrm , battery-monitor , home_assistant , multiplus-ii	45	2436	July 11, 2026
How to get Total Charge/Discharge from MQTT Q&A and troubleshooting beginner , multiplus-ii , multiplus_vebus	10	209	December 2, 2025
Allowing a Inverter Quattro 48/15000/200-2x100 to talk to other systems DIY beginner , offgrid , vrm , victron_community , quattro	14	194	January 9, 2026

Victron integration in Home Assistant

Related topics