# Підключення Victron Energy MultiPlus-II GX та Liontron LX48-100

**URL:** <https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698>\
**Category:** DIY\
**Tags:** multiplus-ii\
**Created:** [15 October 2024 09:16 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698 "2024-10-15T09:16:53Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mitetim](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@Mitetim](https://community.victronenergy.com/u/Mitetim)\
**Post date:** [15 October 2024 09:16 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698/1 "2024-10-15T09:16:53Z")

</div>

Hello!  
I’m mounting a home system with:  
+Victron Energy MultiPlus-II GX 48V 3000VA/35-32  
+Liontron LX48-100 battery (supports CAN, RS485, RS232)

Could you help with these questions?

1. Can I connect them without additional devices (such as Corbo)?
2. What type of cable do I need?
3. What connectors on the Victron and Liontron should I use for this?

---

<div class="post-metadata">

**Author:** ![youn](https://avatars.discourse-cdn.com/v4/letter/y/839c29/32.png) [@youn](https://community.victronenergy.com/u/youn)\
**Post date:** [15 October 2024 09:52 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698/2 "2024-10-15T09:52:26Z")

</div>

hi @Mitetim

> [@Mitetim](#):
>
> Can I connect them without additional devices (such as Corbo)?

Yes you don’t need Cerbo GX since your Multiplus II GX has it built in.

> [@Mitetim](#):
>
> What type of cable do I need?

Just classic RJ45 cable, preferably CAT6 or 7.

> [@Mitetim](#):
>
> What connectors on the Victron and Liontron should I use for this?

Simply the VE.CAN port; to simplify your research, your battery is almost identical (connection level) to the Pylontech battery

---

<div class="post-metadata">

**Author:** ![Mitetim](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@Mitetim](https://community.victronenergy.com/u/Mitetim)\
**Post date:** [15 October 2024 10:04 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698/3 "2024-10-15T10:04:34Z")

</div>

@youn , thankfully! Will try.

---

<div class="post-metadata">

**Author:** ![Mitetim](https://avatars.discourse-cdn.com/v4/letter/m/3da27b/32.png) [@Mitetim](https://community.victronenergy.com/u/Mitetim)\
**Post date:** [15 October 2024 10:09 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698/4 "2024-10-15T10:09:33Z")

</div>

@youn , do you know what is the sign of ve.can at the devices? Victron has bms-can and ve.bus, Liontron - Can, RS485.

---

<div class="post-metadata">

**Author:** ![youn](https://avatars.discourse-cdn.com/v4/letter/y/839c29/32.png) [@youn](https://community.victronenergy.com/u/youn)\
**Post date:** [15 October 2024 15:39 UTC](https://community.victronenergy.com/t/victron-energy-multiplus-ii-gx-liontron-lx48-100/7698/5 "2024-10-15T15:39:55Z")

</div>

Yes you have to use the BMS.CAN port; I’ll give you a link to the documentation for the pylontech; normally the principle is the same.

[https://www.victronenergy.com/live/battery\_compatibility:pylontech\_phantom](https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom)