# Victron Energy meter VM-3P75CT **URL:** \ **Category:** Q&A and troubleshooting\ **Tags:** expert, energy\_meter, cerbo\_gx, ess\ **Created:** [19 December 2024 16:15 UTC](https://community.victronenergy.com/t/victron-energy-meter-vm-3p75ct/15951 "2024-12-19T16:15:52Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Fadi](https://avatars.discourse-cdn.com/v4/letter/f/ecae2f/32.png) [@Fadi](https://community.victronenergy.com/u/Fadi)\ **Post date:** [19 December 2024 16:15 UTC](https://community.victronenergy.com/t/victron-energy-meter-vm-3p75ct/15951/1 "2024-12-19T16:15:52Z")
Hello, I am working with 12 energy meters that have both VE.Can and Ethernet connections. I am planning to connect all 12 meters to an Ethernet switch, which will then be connected to the Cerbo GX. if anybody know if this setup will work? Note: It is not possible to connect through VE.Can because the MPPT charge controller is already connected to the Cerbo GX. Thanks advance. ---
**Author:** ![MSl1](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/msl1/32/41078_2.png) [@MSl1](https://community.victronenergy.com/u/MSl1)\ **Post date:** [3 March 2026 15:45 UTC](https://community.victronenergy.com/t/victron-energy-meter-vm-3p75ct/15951/2 "2026-03-03T15:45:04Z")
VE.Can is a bus system, all devices daisy chained and the first and last device in the VE.Can Bus gets one termination resistor. ---
**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\ **Post date:** [3 March 2026 16:26 UTC](https://community.victronenergy.com/t/victron-energy-meter-vm-3p75ct/15951/3 "2026-03-03T16:26:40Z")
You may need to keep an eye on cerbo load, depending what you intend to do. It does not have limitless resources.