# Victron converting jumping to idle mode

**URL:** <https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149>\
**Category:** DIY\
**Tags:** multiplus\_2\_gx, beginner, ess\
**Created:** [27 January 2025 14:03 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149 "2025-01-27T14:03:41Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [23 February 2025 18:24 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149/21 "2025-02-23T18:24:18Z")

</div>

Not sure yet. But to rule out the ESS assistant, make all of them around your low cut off (they can all be the same value)

---

<div class="post-metadata">

**Author:** ![RoelofH](https://avatars.discourse-cdn.com/v4/letter/r/58f4c7/32.png) [@RoelofH](https://community.victronenergy.com/u/RoelofH)\
**Post date:** [1 March 2025 08:24 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149/22 "2025-03-01T08:24:29Z")

</div>

While the voltage is after a while 51.3V if you zoom in on the moment the inverter stops it is 50.20V. So that indeed gives the impression the ESS settings prevent further discharge.

---

<div class="post-metadata">

**Author:** ![RoelofH](https://avatars.discourse-cdn.com/v4/letter/r/58f4c7/32.png) [@RoelofH](https://community.victronenergy.com/u/RoelofH)\
**Post date:** [31 March 2025 13:00 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149/23 "2025-03-31T13:00:35Z")

</div>

The SoC of the BMS was a different value as the SoC of the Victron.  
I have updated the values both in the BMS and the Victron.  
After this the battery was tripped one time the 20% and one time the 100%.

Now it seems there is no longer a conflict.

---

<div class="post-metadata">

**Author:** ![RoelofH](https://avatars.discourse-cdn.com/v4/letter/r/58f4c7/32.png) [@RoelofH](https://community.victronenergy.com/u/RoelofH)\
**Post date:** [31 March 2025 13:10 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149/24 "2025-03-31T13:10:12Z")

</div>

I have started today a new topic regarding oscillation of the SOC.  
See:  
[https://community.victronenergy.com/t/oscilalting-behavior-at-max-charge-current/27225](https://community.victronenergy.com/t/oscilalting-behavior-at-max-charge-current/27225)

Is this more the behaviour you see?

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/victron/original/1X/21a9a7b5db7c6339715f993568736a7053199995.png) [@system](https://community.victronenergy.com/u/system)\
**Post date:** [14 April 2025 13:10 UTC](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149/25 "2025-04-14T13:10:25Z")

</div>

Closed on 14 April 2025 13:10 UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

[Previous page](https://community.victronenergy.com/t/victron-converting-jumping-to-idle-mode/20149.md?page=1)