# Venus GUI V2 and wrong presentation

**URL:** <https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919>\
**Category:** DIY\
**Tags:** multiplus-ii, cerbo\_gx\
**Created:** [20 March 2025 12:54 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919 "2025-03-20T12:54:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![moacir](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@moacir](https://community.victronenergy.com/u/moacir)\
**Post date:** [20 March 2025 12:54 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919/1 "2025-03-20T12:54:03Z")

</div>

My PV system is installed on AC OUT. In Venus GUI V1 I correctly see the position of my PV and AC loads:

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/e/7/e7bb6c4a33dfd07cb50820f158aae1ff8bf1db6a.png)

However, in GUI V2 I see:

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/2/b/2bb9b1e9175e40ed73920c9ccfbf41c463bdfbbd.png)

Is it a “bug” or a “by design” thing I don’t know?

---

<div class="post-metadata">

**Author:** ![Ramatt](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@Ramatt](https://community.victronenergy.com/u/Ramatt)\
**Post date:** [20 March 2025 13:14 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919/2 "2025-03-20T13:14:36Z")

</div>

This is intentional, the New UI design places all power sources on the left of the screen and loads on the right. This has been discussed quite a bit on the community previously, for example -

> [@New UI - AC connected PV on the output of the multiplus shows on the input](https://community.victronenergy.com/t/new-ui-ac-connected-pv-on-the-output-of-the-multiplus-shows-on-the-input/10494):
>
> Hi, Just updated to 3.50 this morning and enjoying the new guiv2. In my installation I have AC connected PV on the output of the multiplus. The overview in the VRM portal is also showing that, so the settings appear to be correct. However in the overview of the guiv2, it looks like it is connected to the input? Should it be like that? Also I noticed that clicking on the Solar Yield in the overview, gives me more details about the PV power, voltage, amps etc. However the voltage and amps show …

---

<div class="post-metadata">

**Author:** ![moacir](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@moacir](https://community.victronenergy.com/u/moacir)\
**Post date:** [20 March 2025 13:21 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919/3 "2025-03-20T13:21:23Z")

</div>

So it is a “by design” thing. Honestly, I don’t like it because it does not reflect the physical, and real, power circuit. But… It is what it is.

---

<div class="post-metadata">

**Author:** ![moacir](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@moacir](https://community.victronenergy.com/u/moacir)\
**Post date:** [20 March 2025 13:45 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919/4 "2025-03-20T13:45:37Z")

</div>

By the way, VRM is perfect!

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/1/6/16957ecb5e7829306294629dcf0ef3e6de9b0aa5.jpeg)

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/victron/original/1X/21a9a7b5db7c6339715f993568736a7053199995.png) [@system](https://community.victronenergy.com/u/system)\
**Post date:** [3 April 2025 13:46 UTC](https://community.victronenergy.com/t/venus-gui-v2-and-wrong-presentation/25919/5 "2025-04-03T13:46:26Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.