# V3.80 VE-Bus NG BMS Battery Monitor Issues

**URL:** <https://community.victronenergy.com/t/v3-80-ve-bus-ng-bms-battery-monitor-issues/63275>\
**Category:** Q&A and troubleshooting\
**Tags:** vebus, professional, bms\
**Created:** [28 September 2026 07:55 UTC](https://community.victronenergy.com/t/v3-80-ve-bus-ng-bms-battery-monitor-issues/63275 "2026-09-28T07:55:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mister\_nui](https://avatars.discourse-cdn.com/v4/letter/m/e8c25b/32.png) [@mister\_nui](https://community.victronenergy.com/u/mister_nui)\
**Post date:** [28 September 2026 07:55 UTC](https://community.victronenergy.com/t/v3-80-ve-bus-ng-bms-battery-monitor-issues/63275/1 "2026-09-28T07:55:04Z")

</div>

It’s nice that with v3.80 we have the ability to read the VE-Bus NG BMS directly in the GX device, however, since doing this, I have found a couple of issues:

1. The battery watts are showing a null value, and

2. DC loads always show as 0 now that the VE-Bus BMS is selected.