v3.50~13: GUIv2 over VRM comes empty

Beta testing Venus OS beta testing
, ,
1

I am running beta (large version with SignalK) for some months without problems and also GUIv2 as default UI for at least 2 months now.

Today, my system is still up to date in VRM, but I cannot start GUI v2 from VRM - it comes up empty. This was working in the morning, but does not work now:

image
image3108×1802 166 KB

All pages are “empty”.

Data in VRM seems to be up-to-date:

image
image2370×1186 242 KB

However, Firmware update via VRM fails:

image
image692×796 36.2 KB

Is there a way to reboot Cerbo remotely (I do not have ssh access enabled on firewall)?

2

Are you using beta VRM?
There is no way to remotely restart the GX, the automatic restart option needs to be set on the GX.

3

I use https://vrm.victronenergy.com/ which is not beta, right?

4

nope, so GUI V2 will not work there.

5

But it was working there until this evening. I was able to access GUI v2 this morning from VRM.

6

But I think it is not GUI related issue, as now it does not update VRM - same data for 40 minutes:

image
image2360×1200 241 KB

7

gui V2 was only accessible via prod as an error that was corrected.
Non - realtime connectivity is a different issue.

8

@nickdb It is working here on vrm.victronenergy.com

image
image1052×707 51.9 KB

9

I do not understand this: I have this GUIv2 menu option in VRM for quite some time:

image
image1366×1478 126 KB

10

I also have it in PROD and it is functional.

11

My system got back online and now GUI v2 is accessible again.

1 Like
12

I see this usually after updated Venus firmware when I try to open gui-v2 too soon.
Usually Ctrl-R in VRM and re-check of gui-v2 help me to clear the cache and get it working again