# Unable to access the service endpoint:/victron/services/input-vebus

**URL:** <https://community.victronenergy.com/t/unable-to-access-the-service-endpoint-victron-services-input-vebus/35558>\
**Category:** Node-RED\
**Created:** [12 June 2025 09:37 UTC](https://community.victronenergy.com/t/unable-to-access-the-service-endpoint-victron-services-input-vebus/35558 "2025-06-12T09:37:50Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![dfaber](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/dfaber/32/13_2.png) [@dfaber](https://community.victronenergy.com/u/dfaber)\
**Post date:** [14 June 2025 18:50 UTC](https://community.victronenergy.com/t/unable-to-access-the-service-endpoint-victron-services-input-vebus/35558/8 "2025-06-14T18:50:14Z")

</div>

First just pull in the Victron node on to the canvas and click “Deploy”

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/e/9ea7bc0eb619a8c51372fcab3c514475a9b87711.png)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/2/c/2c337dced6d545e913c5f48c914d0f4c1c45dc79.png)

This will give you a warning, but click “Confirm deploy”. Then, double click the Victron Node and you will get the dropdown for the services.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/1/9/19c240dd5ff02eca896bd38c80da1ca6ef644f22.png)

After that, click deploy again and the nodes will work (you will only need to do this once).

---

_[View the full topic](https://community.victronenergy.com/t/unable-to-access-the-service-endpoint-victron-services-input-vebus/35558)._