# Trouble shoot problem

**URL:** <https://community.victronenergy.com/t/trouble-shoot-problem/60114>\
**Category:** DIY\
**Tags:** multiplus\_2\_gx, beginner\
**Created:** [6 July 2026 12:24 UTC](https://community.victronenergy.com/t/trouble-shoot-problem/60114 "2026-07-06T12:24:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cathbeth2016](https://avatars.discourse-cdn.com/v4/letter/c/82dd89/32.png) [@Cathbeth2016](https://community.victronenergy.com/u/Cathbeth2016)\
**Post date:** [6 July 2026 12:24 UTC](https://community.victronenergy.com/t/trouble-shoot-problem/60114/1 "2026-07-06T12:24:57Z")

</div>

The Victron MultiPlus 48V 8000VA indicates an “Overload” fault even with no AC input and no AC output connected. It repeatedly attempts to start, detects an overload, shuts down, and then automatically restarts, repeating the same cycle

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [6 July 2026 13:11 UTC](https://community.victronenergy.com/t/trouble-shoot-problem/60114/2 "2026-07-06T13:11:43Z")

</div>

It is not end user fixable.  
That is an RMA candidate.  
Return it to a warranty centre for assessment or repair

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/victron/original/1X/21a9a7b5db7c6339715f993568736a7053199995.png) [@system](https://community.victronenergy.com/u/system)\
**Post date:** [20 July 2026 13:11 UTC](https://community.victronenergy.com/t/trouble-shoot-problem/60114/3 "2026-07-20T13:11:50Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.