# Shelly Device automatic disconnection

**URL:** <https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958>\
**Category:** Node-RED\
**Tags:** shelly, node-red, expert, vrm, cerbo-gx, new\_products\
**Created:** [11 November 2026 06:44 UTC](https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958 "2026-11-11T06:44:00Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![TorukDovah](https://avatars.discourse-cdn.com/v4/letter/t/ea5d25/32.png) [@TorukDovah](https://community.victronenergy.com/u/TorukDovah)\
**Post date:** [11 November 2026 06:44 UTC](https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958/1 "2026-11-11T06:44:00Z")

</div>

My Equipment:

Cerbo GX OS3.80  
Multiplus II 5kva  
SmartSolar MPPT 450/100  
Shelly PM1 gen 3 firmware 2.1.1  
Shelly addon with temperature sensor on PM1

When enabling the Shelly device in the remote console it is available as a switch on the VRM tab. But it automatically disables after some hours and require activation in the remote console again. Is this a known bug? What is the workaround?  
I used Node Red to add the temperature onto my VRM dashboard, but I have not yet managed to successfully add the PM1 as a controllable Switch yet

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [11 November 2026 06:59 UTC](https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958/2 "2026-11-11T06:59:18Z")

</div>

Are you using static IP’s on the device?

---

<div class="post-metadata">

**Author:** ![TorukDovah](https://avatars.discourse-cdn.com/v4/letter/t/ea5d25/32.png) [@TorukDovah](https://community.victronenergy.com/u/TorukDovah)\
**Post date:** [11 November 2026 07:01 UTC](https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958/3 "2026-11-11T07:01:03Z")

</div>

The IP has been the same for a long time. I am not the only one that has been having this issue, some other installers have resorted to using Node Red because of this

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [11 November 2026 14:47 UTC](https://community.victronenergy.com/t/shelly-device-automatic-disconnection/64958/4 "2026-11-11T14:47:59Z")

</div>

There are Shelly devices with firmware issues, some of these were discussed when the features were released.  
Some use DHCP which had issues with auto-discovery. There are topics on this from earlier.
