Hello everyone.
I have been running a system with storage for a good two years.
The system consists of a Multiplus 2, the Cerbo GX, the EM24 and three Pylontech US5000.
As a trained electrician/electronics engineer, I installed and commissioned everything myself.
My old PV system (SMA inverter) is monitored separately on all three phases via a Shelly 3em Pro.
I have now read by chance that the Shelly 3em Pro could be integrated into VRM.
Is that true? It would of course be great if I could also see the PV system via the VRM app, directly at the AC input.
I have found a lot here in the forum and in other forums. But somehow there are always problems with it and often with the other Version Shelly 3em, Not the Pro version.
So it’s a bit of a mess.
So does anyone have a ready-made solution that might not be too complicated, so that I can see the PV system with all three phases with the 3em Pro at the AC input via VRM?
This is an example:
