# Setting charging source priority **URL:** \ **Category:** Q&A and troubleshooting\ **Tags:** victron\_community, beginner, easysolar\_all-in-one\ **Created:** [6 January 2025 13:45 UTC](https://community.victronenergy.com/t/setting-charging-source-priority/17720 "2025-01-06T13:45:01Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![aperikub](https://avatars.discourse-cdn.com/v4/letter/a/50afbb/32.png) [@aperikub](https://community.victronenergy.com/u/aperikub)\ **Post date:** [6 January 2025 13:45 UTC](https://community.victronenergy.com/t/setting-charging-source-priority/17720/1 "2025-01-06T13:45:01Z")
Hello everyone, I’ve bought a EasySolar-II 24 250/70 GX, I have some PVs connected, AGM batteries and sometimes I’m connected to the grid through AC IN. My problem is that I want the Grid to charge my batteries, even if the panels are producing, is it possible ? Thanks !! ---
**Author:** ![aperikub](https://avatars.discourse-cdn.com/v4/letter/a/50afbb/32.png) [@aperikub](https://community.victronenergy.com/u/aperikub)\ **Post date:** [7 January 2025 12:03 UTC](https://community.victronenergy.com/t/setting-charging-source-priority/17720/2 "2025-01-07T12:03:40Z")
I will elaborate a bit, the problem seems to be a lack of communication between the inverter/charger and the MPPT. On the easysolar diplay, when I’m on the grid only, the HUB-1 shows the charging state, like : HUB - 1 Float But if I turn the panels on, then I have a second display that shows Solar : Bulk at the same time. If I check my batteries then, it shows I’m actually in bulk,. So my question would be : is there a way to make the MPPT consider the HUB-1 status ? Despite being an electrician, this is my first tango with Victron devices (I previously had a “real” all in one inverter, that was much more limited) and I’m totally lost with all the options/Interfaces (Victron connect/Remote console/VEconfigure). Help please !!!