Second Quattro QUA488024000 (fw 499) in parallel + mixed US5000/US3000C Pylontech bank

Hello,

I have a single-phase ESS system and plan to add a second identical inverter in parallel. I would like to confirm a few points before buying.

Current system

  • Victron Quattro 48/8000/110-100/100 230V VE.Bus, part number QUA488024000, serial HQ22266QHE3, product ID 0x2655, VE.Bus firmware 2655499 (499)
  • Cerbo GX, Venus OS Large 3.80, ESS Assistant, MK3
  • MPPT 450/100 and MPPT 450/200 (38 panels)
  • Pylontech bank, 4 modules now: 2 × US5000 (100 Ah) and 2 × US3000C (74 Ah), 348 Ah in total (about 16.7 kWh). Battery limits reported by the BMS: charge 129.6 A, discharge 254 A

Planned change

  1. Add 2 more US5000 modules, so the bank becomes 4 × US5000 + 2 × US3000C (6 modules, 548 Ah, about 26.3 kWh).
  2. Add a second Quattro with the same part number QUA488024000 and connect it in parallel (VE.Bus, one phase).

Questions

  1. Both units have the same part number, but the new one will be a newer production batch. Is there any hardware revision difference that could prevent parallel operation? Do both units have to run exactly the same VE.Bus firmware? If the new unit ships with a different firmware, can I bring it to 499 (or both to the latest) before connecting them?
  2. Any known issues with ESS and DVCC with two 8 kVA units on a Pylontech bank mixing US5000 and US3000C modules? The BMS discharge limit is about 254 A, while each Quattro can draw up to 188 A from the battery. Should I limit anything (DVCC, inverter power) or is the BMS limit enough?
  3. Is a mixed US5000 / US3000C bank acceptable in your experience on one CAN connection to the Cerbo GX?

Thank you very much for your help.

Hi, please follow the new guidance for system compatibility, found in the documentation for parallel and 3-phase systems:

Compatibility IDs explained

The compatibility ID denotes which devices can be combined in a VE.Bus system.
This ID can be found on the stickers of the units.1)
A compatibility ID consists of a 4-digit number followed by a letter. (e.g. 2623_B)
VE.Bus systems can only be made with devices with identical 4-digit numbers and only devices with the same letter can be put in a single phase.

  • Make sure that the 4-digit number in the compatibility ID of all units in the VE.Bus system is identical .
  • Make sure that units in a single phase (so parallel units) have an identical letter in the compatibility ID.

1) If there is no compatibility ID on the sticker then the compatibility ID consists of the first 4 digits of the complete firmware number followed by the letter A.
The one exception to this rule is firmware 2699xxx: If there is no compatibility ID on the sticker then the compatibility ID is 2629_A (instead of 2699_A).

Note: The 4-digit number in the compatibility ID does not necessarily represent the firmware version of the unit itself. For instance a MultiPlus-II 24/5000/120-50 could require firmware version 2696xxx while the compatibility id sticker on that unit shows 2615_B.

Thank you, this is very helpful. Our existing unit has no compatibility ID sticker visible, so I understand it is 2655_A (firmware 2655499). Two follow-up questions:

  1. Do you know which compatibility ID is printed on current production units of QUA488024000 (made in India)? I want to be sure it will be 2655_A and not another letter before I buy.
  2. My questions about ESS/DVCC with two units on a Pylontech bank (BMS discharge limit about 254 A, each Quattro up to 188 A from the battery) and about mixing US5000 and US3000C are still open. If anyone has experience with this, I would be grateful.

Hi, have a look on the professional site. iirc in the vebus firmware folder is a document that tracks this.

https://professional.victronenergy.com/downloads/firmware/file-download/?name=VE.Bus%20(Multis%2C%20Inverters%20and%20Quattros)/CompID_latest_shipping_per_warehouse.xlsx

Pylontech document what models can be mixed and what the requirements are - newest as master, sorting the initial charging etc.
Not all models can be mixed but those they support seem to work fine. They are connected as one battery pack.
Best is to download their documents or contact pylon support or your supplier, they will be better placed to guide you and to suggest firmware updates, if required.