# Orion XS Engine Shutdown settings on 2022 Navigator

**URL:** <https://community.victronenergy.com/t/orion-xs-engine-shutdown-settings-on-2022-navigator/2185>\
**Category:** DIY\
**Tags:** vehicles, orion\_xs, beginner\
**Created:** [4 September 2024 17:31 UTC](https://community.victronenergy.com/t/orion-xs-engine-shutdown-settings-on-2022-navigator/2185 "2024-09-04T17:31:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mra](https://avatars.discourse-cdn.com/v4/letter/m/d78d45/32.png) [@mra](https://community.victronenergy.com/u/mra)\
**Post date:** [4 September 2024 17:31 UTC](https://community.victronenergy.com/t/orion-xs-engine-shutdown-settings-on-2022-navigator/2185/1 "2024-09-04T17:31:09Z")

</div>

I have a new Orion XS 12-21V|50A|Non-isolated installed in an Airstream equiped with Battleborn LiFePo4 batteries and a 2022 Lincoln Navigator. The XS Engine shutdown detection believes that my engine is hardly ever running. So obviously I have some things set incorrectly; here are my settings:

Alternator type: Smart Alternator  
Start voltage: 14.00  
Delayed start voltage: 13.30  
Delayed start voltage delay: 120s  
Shutdown voltage: 13.10

Is this because the “Shutdown voltage” is set too high?

Thanks!

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [27 September 2026 11:11 UTC](https://community.victronenergy.com/t/orion-xs-engine-shutdown-settings-on-2022-navigator/2185/2 "2026-09-27T11:11:02Z")

</div>

> [@mra](#):
>
> Start voltage: 14.00

It more likely the start one it’s not reaching that or not reaching that for long enough, or not keeping it under load… Usually 13.8v is high.  
For the most part the default ones are good. Sometimes inrais the curly off a bit of the battery rests higher.

---

<div class="post-metadata">

**Author:** ![Karl-Heinz](https://avatars.discourse-cdn.com/v4/letter/k/ad7895/32.png) [@Karl-Heinz](https://community.victronenergy.com/u/Karl-Heinz)\
**Post date:** [27 September 2026 11:30 UTC](https://community.victronenergy.com/t/orion-xs-engine-shutdown-settings-on-2022-navigator/2185/3 "2026-09-27T11:30:54Z")

</div>

Check your wiring for contact resistance!

As an aside, you’re probably familiar with the discussion about the internal wiring of Battelborn batteries and the bug, er, “feature” that shuts them down when the plastic plate melts (see Will Prowse’s video and the fires involving other campers with Battleborn battery systems).