# Multiplus II no lights, unable to turn on **URL:** \ **Category:** DIY\ **Tags:** rv, multiplus-ii, diy\ **Created:** [5 September 2026 16:25 UTC](https://community.victronenergy.com/t/multiplus-ii-no-lights-unable-to-turn-on/62535 "2026-09-05T16:25:28Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Jbjam100](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@Jbjam100](https://community.victronenergy.com/u/Jbjam100)\ **Post date:** [5 September 2026 16:25 UTC](https://community.victronenergy.com/t/multiplus-ii-no-lights-unable-to-turn-on/62535/1 "2026-09-05T16:25:28Z")
This is a camper trailer install with Multiplus II and lithium batteries + solar charging. I was troubleshooting GFCI tripping upon return from a trip (about 1 year of shore power from residence, then all of a sudden tripping) and trying some things recommended with Victron community, and for no apparent reason, Inverter will not turn on in any mode - no lights. Pushed 30 amp reset breaker to no avail. Is there an internal breaker of some sort? ---
**Author:** ![Jbjam100](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@Jbjam100](https://community.victronenergy.com/u/Jbjam100)\ **Post date:** [5 September 2026 23:48 UTC](https://community.victronenergy.com/t/multiplus-ii-no-lights-unable-to-turn-on/62535/2 "2026-09-05T23:48:18Z")
This situation was resolved by disconnecting all loads and the batteries for 30 minutes and reconnecting. All operations restored to normal. ---
**Author:** ![system](https://europe1.discourse-cdn.com/victron/original/1X/21a9a7b5db7c6339715f993568736a7053199995.png) [@system](https://community.victronenergy.com/u/system)\ **Post date:** [19 September 2026 23:48 UTC](https://community.victronenergy.com/t/multiplus-ii-no-lights-unable-to-turn-on/62535/3 "2026-09-19T23:48:39Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.