# Multiplus 12/500/20 and redodo LiFePO battery for home PC UPS **URL:** \ **Category:** DIY\ **Tags:** ups, domestic, multiplus, beginner\ **Created:** [27 July 2025 15:58 UTC](https://community.victronenergy.com/t/multiplus-12-500-20-and-redodo-lifepo-battery-for-home-pc-ups/40979 "2025-07-27T15:58:02Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Aly](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Aly](https://community.victronenergy.com/u/Aly)\ **Post date:** [16 May 2026 19:16 UTC](https://community.victronenergy.com/t/multiplus-12-500-20-and-redodo-lifepo-battery-for-home-pc-ups/40979/3 "2026-05-16T19:16:40Z")
For anyone still reading this. The default DIP Switch settings for LiFePo4 batteries are usually not correct. The default Lithium battery Preset values (in the VE Config application) also do not fit typical cases. I am going through the setting up of a similar system. Read the required steps here: > [@Inverter briefly switches off after battery is fully charged](https://community.victronenergy.com/t/inverter-briefly-switches-off-after-battery-is-fully-charged/58041): > > Hi all. I just received some older hardware, that was sitting in the storage somewhere for approx. 5 years. Inverter MultiPlus - 1600VA (48 Vdc) Battery Dyness B4850 (LiFePo4, 2.4 kWh) with CAN bus connection Display CCGX (Color Control GX - seems to be a bit older, limited documentation exists) After a full day of wiring, configuring and figuring out correct pinouts for a CAN bus, got the system working. CCGX was updated to the latest version. Can’t update the inverter as I don’t h… --- _[View the full topic](https://community.victronenergy.com/t/multiplus-12-500-20-and-redodo-lifepo-battery-for-home-pc-ups/40979)._