# Multiple Cerbo and Raspi, can't stay on one device with Android GX display **URL:** \ **Category:** DIY\ **Tags:** android-gx-display, beginner, cerbo\_gx, cerbo-gx\ **Created:** [29 September 2026 21:41 UTC](https://community.victronenergy.com/t/multiple-cerbo-and-raspi-cant-stay-on-one-device-with-android-gx-display/63348 "2026-09-29T21:41:38Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![jperez](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@jperez](https://community.victronenergy.com/u/jperez)\ **Post date:** [30 September 2026 06:54 UTC](https://community.victronenergy.com/t/multiple-cerbo-and-raspi-cant-stay-on-one-device-with-android-gx-display/63348/6 "2026-09-30T06:54:51Z")
> [@rosspeel](#): > > I have 4 Cerbo devices running on network made up of 1 Victron Cerbo and 3 Raspi, the problem is the android keeps changing automatically from one cebro to another, I am wanting to lock the android device down to just one Cerbo device and stop the cycling to the other Cerbo device, is there a way to go about doing this lock Have you updated to v1.2 or v1.5beta1? Starting with v1.2, we’ve made improvements to prevent the app from jumping between GXs. > [@Android GX Display v1.2 released](https://community.victronenergy.com/t/android-gx-display-v1-2-released/63159): > > GX Android Display v1.2 available Hi all, Version 1.2 of the GX Android Display app is available. It is the first release since v1.01, and it is mostly about reliability. How to get it Displays with automatic updates enabled will install it by themselves during the night. To update straight away, open the configuration menu by pressing and holding the lower left corner of the screen for five seconds, then use the manual update check. Highlights While powered from the charger, the display … --- _[View the full topic](https://community.victronenergy.com/t/multiple-cerbo-and-raspi-cant-stay-on-one-device-with-android-gx-display/63348)._