# MQTT Explorer doesn't show all paths

**URL:** <https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604>\
**Category:** Node-RED\
**Tags:** cerbo\_gx\
**Created:** [18 September 2025 14:00 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604 "2025-09-18T14:00:35Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [18 September 2025 14:00 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/1 "2025-09-18T14:00:35Z")

</div>

![image](https://europe1.discourse-cdn.com/victron/original/3X/f/6/f67fe8b137ffe6db2c9bb2d165bc5460e834447c.png)

What is the reason for this?

After reboot al larger list was coming up but also not complete.

At least the paths I was searching for where not in the list.

Where can I find these paths?

Dbus path: **/Relay/0/State**

Dbus path: **/Ac/ActiveIn/ActiveInput**

---

<div class="post-metadata">

**Author:** ![UH60\_Pilot](https://avatars.discourse-cdn.com/v4/letter/u/d2c977/32.png) [@UH60\_Pilot](https://community.victronenergy.com/u/UH60_Pilot)\
**Post date:** [18 September 2025 14:35 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/2 "2025-09-18T14:35:40Z")

</div>

Not sure if this is the issue, but when I had that problem, it was because under “Advanced” I had not subscribed correctly to my unit. I had to add:

”N/xxxxxxxxxxxx/#”

This did it for me.

---

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [18 September 2025 14:42 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/3 "2025-09-18T14:42:48Z")

</div>

No not realy.

Looking for something like this : N/{DeviceId}/grid/40/Ac/Power

N/{DeviceId}/ **Relay/0/State** doesn’t work

Just switched off and back on MQTT in the settings and then the list showed up again but missing the paths I search in the list. Seems me not complete.

Working on the latest Beta firmware but i don’t think that is the cause as nowbody else mentioned this yet.

---

<div class="post-metadata">

**Author:** ![KRUP85](https://avatars.discourse-cdn.com/v4/letter/k/4af34b/32.png) [@KRUP85](https://community.victronenergy.com/u/KRUP85)\
**Post date:** [18 September 2025 17:07 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/4 "2025-09-18T17:07:06Z")

</div>

Sid you send ”keepalive” ? Without this, no ale topics are visible.

---

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [19 September 2025 06:38 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/5 "2025-09-19T06:38:37Z")

</div>

No how do I have to do this?

---

<div class="post-metadata">

**Author:** ![KRUP85](https://avatars.discourse-cdn.com/v4/letter/k/4af34b/32.png) [@KRUP85](https://community.victronenergy.com/u/KRUP85)\
**Post date:** [19 September 2025 07:52 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/6 "2025-09-19T07:52:35Z")

</div>

> **[Keepalive via NodeRed to Venus - VictronEnergy](https://communityarchive.victronenergy.com/questions/193342/keepalive-via-nodered-to-venus.html)**

---

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [19 September 2025 09:17 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/7 "2025-09-19T09:17:18Z")

</div>

Ok thx found it

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/3/b/3b71bd3bce076d1c1b00fc599e6ff5b91e1616b0.png)

BUT can’t find a path ActiveIn : wich gives me the state if grid is active.

Any idea what the path name should be?

---

<div class="post-metadata">

**Author:** ![KRUP85](https://avatars.discourse-cdn.com/v4/letter/k/4af34b/32.png) [@KRUP85](https://community.victronenergy.com/u/KRUP85)\
**Post date:** [19 September 2025 10:33 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/8 "2025-09-19T10:33:04Z")

</div>

Well, Im offgrid with generator autostart. So no GRID in MPs selected. BUT you definetly can use LED status 🙂

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/9/2/924569cdbc10258e320658dce01fc995a0946716.png)

---

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [19 September 2025 10:57 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/9 "2025-09-19T10:57:33Z")

</div>

Led in indeed option but found another one :

/vebus/276/Devices/2/ExtendStatus/AcIn1Available

I think this is the one I was looking for (led shall be processed out off this data).

Thanks for the help!

---

<div class="post-metadata">

**Author:** ![KRUP85](https://avatars.discourse-cdn.com/v4/letter/k/4af34b/32.png) [@KRUP85](https://community.victronenergy.com/u/KRUP85)\
**Post date:** [19 September 2025 11:51 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/10 "2025-09-19T11:51:17Z")

</div>

I was happy to help. Just be careful if you use “ignore AC in flag”. Then “AC1 in avilable” is available but the grid is not used.

---

<div class="post-metadata">

**Author:** ![Sdb](https://avatars.discourse-cdn.com/v4/letter/s/ee59a6/32.png) [@Sdb](https://community.victronenergy.com/u/Sdb)\
**Post date:** [19 September 2025 12:59 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/11 "2025-09-19T12:59:31Z")

</div>

I know but I found gridlost as well so I will use that one.

---

<div class="post-metadata">

**Author:** ![Blue\_Cat](https://avatars.discourse-cdn.com/v4/letter/b/ecae2f/32.png) [@Blue\_Cat](https://community.victronenergy.com/u/Blue_Cat)\
**Post date:** [24 October 2025 13:06 UTC](https://community.victronenergy.com/t/mqtt-explorer-doesnt-show-all-paths/45604/12 "2025-10-24T13:06:32Z")

</div>

Adding my solution incl. the Node-RED code.

![image](https://europe1.discourse-cdn.com/victron/original/3X/a/c/acaa57ae11dd6004706472aaa49441764b32833b.png)

```auto
[
    {
        "id": "15e4f4339b18da09",
        "type": "mqtt out",
        "z": "3da6c257dee5a423",
        "name": "Cerbo AS2",
        "topic": "",
        "qos": "",
        "retain": "",
        "respTopic": "",
        "contentType": "",
        "userProps": "",
        "correl": "",
        "expiry": "",
        "broker": "d2736df38f68432a",
        "x": 1190,
        "y": 80,
        "wires": []
    },
    {
        "id": "8debaf609c62c2d2",
        "type": "inject",
        "z": "3da6c257dee5a423",
        "name": "Keepalive",
        "props": [
            {
                "p": "topic",
                "vt": "str"
            },
            {
                "p": "payload"
            }
        ],
        "repeat": "55",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "R/c0619ab3d76f/keepalive",
        "payload": "",
        "payloadType": "str",
        "x": 1030,
        "y": 80,
        "wires": [
            [
                "15e4f4339b18da09"
            ]
        ]
    },
    {
        "id": "125e64cf3945c990",
        "type": "comment",
        "z": "3da6c257dee5a423",
        "name": "DOK",
        "info": "https://communityarchive.victronenergy.com/questions/155407/mqtt-local-via-mqtt-broker.html\nleeres payload muss drin sein, sonst tut's nicht",
        "x": 1230,
        "y": 40,
        "wires": []
    },
    {
        "id": "d2736df38f68432a",
        "type": "mqtt-broker",
        "name": "",
        "broker": "192.168.178.51",
        "port": 1883,
        "clientid": "",
        "autoConnect": true,
        "usetls": false,
        "protocolVersion": 4,
        "keepalive": 60,
        "cleansession": true,
        "autoUnsubscribe": true,
        "birthTopic": "",
        "birthQos": "0",
        "birthRetain": "false",
        "birthPayload": "",
        "birthMsg": {},
        "closeTopic": "",
        "closeQos": "0",
        "closeRetain": "false",
        "closePayload": "",
        "closeMsg": {},
        "willTopic": "",
        "willQos": "0",
        "willRetain": "false",
        "willPayload": "",
        "willMsg": {},
        "userProps": "",
        "sessionExpiry": ""
    }
]

```