# ModbusTCP EasySolar II GX 3000 - wich IDs for Energie consumption in kWh

**URL:** <https://community.victronenergy.com/t/modbustcp-easysolar-ii-gx-3000-wich-ids-for-energie-consumption-in-kwh/25758>\
**Category:** Modifications\
**Tags:** modbus\_tcp, easysolar\_all-in-one, vrm, offgrid, diy\
**Created:** [19 March 2025 08:34 UTC](https://community.victronenergy.com/t/modbustcp-easysolar-ii-gx-3000-wich-ids-for-energie-consumption-in-kwh/25758 "2025-03-19T08:34:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alex1966](https://avatars.discourse-cdn.com/v4/letter/a/77aa72/32.png) [@Alex1966](https://community.victronenergy.com/u/Alex1966)\
**Post date:** [19 March 2025 08:34 UTC](https://community.victronenergy.com/t/modbustcp-easysolar-ii-gx-3000-wich-ids-for-energie-consumption-in-kwh/25758/1 "2025-03-19T08:34:49Z")

</div>

Hello,

i use ModbusTCP to read the values/states from my EasySolar to use it in IOBroker.  
it works well for the Battery, Yields, and current Power-states (W) but i don’t find the IDs to read the Energy-Consumption in kWh (displayed in the VRM-Portal.

in the “CCGX-Modbus-TCP-register-list-3.50.xlsx” there are several entries for reading energie-consumption (kWh) but no one works.

what did i wrong ?

ty  
Alex