# My Victron system **URL:** \ **Category:** Show us your system\ **Tags:** pv-inverter, pylontech, multiplus-ii, diy, cerbo-gx\ **Created:** [15 October 2026 06:08 UTC](https://community.victronenergy.com/t/meine-victron-anlage/63959 "2026-10-15T06:08:09Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![T.M](https://avatars.discourse-cdn.com/v4/letter/t/ad7895/32.png) [@T.M](https://community.victronenergy.com/u/T.M)\ **Post date:** [15 October 2026 06:08 UTC](https://community.victronenergy.com/t/meine-victron-anlage/63959/1 "2026-10-15T06:08:09Z")
Hello dear community, My system currently consists of 18.3 kWp and 28.8 kWh of storage. It all started with a plug-in solar system, and then I got bitten by the blue bug. šŸ˜„ Iā€™m planning to add a Fronius Symo soon, as I can fit another 10 panels on a flat roof. My modules are Solarfabrik Solo S4 Halfcut and DAH Solar DHM 54X10. The entire system runs via ACout with a backup power switch. Split across: - East: 18x Solarfabrik, 2x DAH plug-in solar system - West: 10x Solarfabrik - South: 14x DAH My system itself consists of: - 3x Multi Plus II - 450/200 - 250/60 - Hoymiles plug-in solar system - Cerbo GX - 12x Pylontech 2000c ![Overall view](https://europe1.discourse-cdn.com/victron/original/3X/9/3/937b45c16619c0a555f92ae7f767c06a2c1ea9b0.jpeg) ![Wiring](https://europe1.discourse-cdn.com/victron/original/3X/f/d/fd9e37cef3786113943e4ebf34837dc88f5cc2bb.jpeg) ![AC wiring](https://europe1.discourse-cdn.com/victron/original/3X/4/4/44608e57fa865f96fa1b12b890d9fa4c666e11ab.jpeg) ![Pylontech view](https://europe1.discourse-cdn.com/victron/original/3X/6/e/6e0f05e126d9a952ccfa0662e5e0a385bad1bee8.jpeg) ![Wall clearance](https://europe1.discourse-cdn.com/victron/original/3X/a/4/a4d6b24cf113a8e01c6f3111d92823ef57b63bab.jpeg) ---
**Author:** ![Radunre](https://avatars.discourse-cdn.com/v4/letter/r/cdc98d/32.png) [@Radunre](https://community.victronenergy.com/u/Radunre)\ **Post date:** [15 October 2026 06:23 UTC](https://community.victronenergy.com/t/meine-victron-anlage/63959/2 "2026-10-15T06:23:00Z")
Very nice and clean construction, always impressed by square aluminium modularity ! ---
**Author:** ![drawding](https://avatars.discourse-cdn.com/v4/letter/d/4af34b/32.png) [@drawding](https://community.victronenergy.com/u/drawding)\ **Post date:** [15 October 2026 08:57 UTC](https://community.victronenergy.com/t/meine-victron-anlage/63959/3 "2026-10-15T08:57:30Z")
Very nice looking setup! Mine certainly do not look as nice as yours. I have 2 Victron systems. 2 X 48/5000/70 split phase with 2 X 250/70, Lynx Distributor, Lynx BMS, Cerbo GX 2 X 24/3000/70 split phase with 4 X 150/85, 2 X 150/35, Cerbo GX My primary system is 48V but I have more storage capacity on 24V so through Node Red if the 48V system gets low or has high load the 24V system will provide support via the AC In 2 of the Quattro.