# Lynx shunt communications **URL:** \ **Category:** Q&A and troubleshooting\ **Tags:** lynx\_shunt, beginner, vrm, cerbo\_gx\ **Created:** [26 September 2025 16:40 UTC](https://community.victronenergy.com/t/lynx-shunt-communications/46053 "2025-09-26T16:40:32Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Danielbuchhansen](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@Danielbuchhansen](https://community.victronenergy.com/u/Danielbuchhansen)\ **Post date:** [26 September 2025 16:40 UTC](https://community.victronenergy.com/t/lynx-shunt-communications/46053/1 "2025-09-26T16:40:33Z")
Hello. I have a Lynx shunt and try to connect over VRM to look up the shunt settings, but it will not find it. I have communications between the cerbo gx and the shunt ---
**Author:** ![M\_Lange](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/m_lange/32/16_2.png) [@M\_Lange](https://community.victronenergy.com/u/M_Lange)\ **Post date:** [26 September 2025 21:43 UTC](https://community.victronenergy.com/t/lynx-shunt-communications/46053/2 "2025-09-26T21:43:30Z")
The Lynx Shunt is configured via the remote console of the GX device. > **[6. Installation](https://www.victronenergy.com/media/pg/Lynx_Shunt_VE.Can_-_M10/en/installation.html#UUID-cc94eebd-796e-37ef-af34-23ebe552d45f)** ---
**Author:** ![thiemovanengelen](https://avatars.discourse-cdn.com/v4/letter/t/8491ac/32.png) [@thiemovanengelen](https://community.victronenergy.com/u/thiemovanengelen)\ **Post date:** [15 October 2025 08:37 UTC](https://community.victronenergy.com/t/lynx-shunt-communications/46053/3 "2025-10-15T08:37:22Z")
Hi The Lynx Shunt can also be configured by using VictronConnect and a local network connection by connecting to the Cerbo GX or by signing in to VRM in VictronConnect and connect to the Cerbo GX using the “Remote” tab. With kind regards, Thiemo van Engelen