# I have two AIvolt 4300 generators and am trying too run 30a on both to a splitter to 50a and my new

**URL:** <https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700>\
**Category:** DIY\
**Tags:** multiplus-ii, parallel\
**Created:** [10 September 2026 17:22 UTC](https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700 "2026-09-10T17:22:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![pfsjmhall](https://avatars.discourse-cdn.com/v4/letter/p/3e96dc/32.png) [@pfsjmhall](https://community.victronenergy.com/u/pfsjmhall)\
**Post date:** [10 September 2026 17:22 UTC](https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700/1 "2026-09-10T17:22:52Z")

</div>

I have two AIvolt 4300 duel fuel generators and I was running both with 30a each with a splitter to 50a and my new victory Multi Plus II keeps kicking out says overload? AIvolt says it should work? They can tell me if there is a parallel cable that will work? Anyone have any in put?

---

<div class="post-metadata">

**Author:** ![Jeroen2](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/jeroen2/32/7234_2.png) [@Jeroen2](https://community.victronenergy.com/u/Jeroen2)\
**Post date:** [12 September 2026 22:42 UTC](https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700/2 "2026-09-12T22:42:05Z")

</div>

Good evening,

Can you send us the data of the gens and the inverter, what is that “splitter” you use?We cannot help you with the info you give us at the moment.

Regards, Jeroen.

---

<div class="post-metadata">

**Author:** ![pfsjmhall](https://avatars.discourse-cdn.com/v4/letter/p/3e96dc/32.png) [@pfsjmhall](https://community.victronenergy.com/u/pfsjmhall)\
**Post date:** [13 September 2026 20:11 UTC](https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700/3 "2026-09-13T20:11:53Z")

</div>

Here is a photo of these gens 2

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/4/f/4f083101ed14fd6369da02efe6beb7c0d71fec5e.jpeg)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/e/5/e5bb5e772e6f0aae2dc162d23e870368414c4ba5.jpeg)

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/1/0/107942e2a3f7773ff39bb4741a7bf9ffd67dd13e.jpeg)

I hope this answers your Q’s this inverter just give overload error then trips out.

Thank you!

---

<div class="post-metadata">

**Author:** ![Jeroen2](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/jeroen2/32/7234_2.png) [@Jeroen2](https://community.victronenergy.com/u/Jeroen2)\
**Post date:** [13 September 2026 20:44 UTC](https://community.victronenergy.com/t/i-have-two-aivolt-4300-generators-and-am-trying-too-run-30a-on-both-to-a-splitter-to-50a-and-my-new/62700/4 "2026-09-13T20:44:09Z")

</div>

Good evening,

Set the input of the multi first to 20A and then test again, if ok then slightly up till unstable, then slightly back again.

> **[MultiPlus Generator FAQ \[Victron Energy\]](https://www.victronenergy.com/live/multiplus_faq)**

Here you can read what to do as well.

Regards, Jeroen.