# GX Remote Console : VRM : gui-v1 empty, no overview, neither settings etc

**URL:** <https://community.victronenergy.com/t/gx-remote-console-vrm-gui-v1-empty-no-overview-neither-settings-etc/36442>\
**Category:** DIY\
**Tags:** multiplus-ii, gx\_device, victron\_community, vrm, diy\
**Created:** [19 June 2025 10:16 UTC](https://community.victronenergy.com/t/gx-remote-console-vrm-gui-v1-empty-no-overview-neither-settings-etc/36442 "2025-06-19T10:16:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![DutchSolarFreak](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/dutchsolarfreak/32/133_2.png) [@DutchSolarFreak](https://community.victronenergy.com/u/DutchSolarFreak)\
**Post date:** [19 June 2025 10:29 UTC](https://community.victronenergy.com/t/gx-remote-console-vrm-gui-v1-empty-no-overview-neither-settings-etc/36442/2 "2025-06-19T10:29:28Z")

</div>

Maybe this will help:

> [@After update from 3.55 to 3.60](https://community.victronenergy.com/t/after-update-from-3-55-to-3-60/36431/3):
>
> FYI It’s important before you update to 3.60 to update SetupHelper and/or other installed packages. I had an old version of TailScaleGX installed on my CerboGX and that caused a white screen in GUI-v1 I suggest to downgrade to 3.55 and update the packages (using Gui-v1) and after that install 3.60 again. An update using the CLI is also possible. For more information look here: [GitHub - kwindrem/SetupHelper: Helper functions to simplify writing setup scripts that modify VenusOs functionality. …](https://github.com/kwindrem/SetupHelper)

---

_[View the full topic](https://community.victronenergy.com/t/gx-remote-console-vrm-gui-v1-empty-no-overview-neither-settings-etc/36442)._