# GUI V2 sensor custom temperature ranges for display \[feature request\]

**URL:** <https://community.victronenergy.com/t/gui-v2-sensor-custom-temperature-ranges-for-display-feature-request/22595>\
**Category:** DIY\
**Tags:** 350-new-ui, victron\_community, feature-request, diy, not-listed\
**Created:** [18 February 2025 09:52 UTC](https://community.victronenergy.com/t/gui-v2-sensor-custom-temperature-ranges-for-display-feature-request/22595 "2025-02-18T09:52:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![iand](https://avatars.discourse-cdn.com/v4/letter/i/f05b48/32.png) [@iand](https://community.victronenergy.com/u/iand)\
**Post date:** [18 February 2025 09:52 UTC](https://community.victronenergy.com/t/gui-v2-sensor-custom-temperature-ranges-for-display-feature-request/22595/1 "2025-02-18T09:52:26Z")

</div>

When setting up a temperature sensor there are various predefined temperature ranges:

Battery: -20C to +60C  
Fridge: 0C to +20C  
Generic: -40C to +60C  
Room: +5C to +35C  
Outdoor: -40C to +60C  
Water heater: 0C to +100C  
Freezer: -30C to 0C

There are some cases (I have several!) where none of these are really right – why not have a “Custom” range (for each sensor) where you can enter the min and max temperatures?

P.S. I’ve used every possible method to label this as a “feature request” to show how awkward this is… 😉