I changed from a Quattro 8K to a multi plus II 5k ,
i imported the settings from Quattro to multi plus ,
but my system keeps pushing 1000w into the grid ( grid feed in is on and settings are 1000w )
but with my quattro if the sun is gone, there was no feed-in anymore… now the systeem keeps pushing 1000w into the grid.
normaly that goes to 0w , when the sun is gone…
see pictures :
is there somthing diff. between quattro and the multi plus???
all is updated to the last firmwares
update =
i did a test with the Grid metering : changed it to external meter ( i do not have )
and back to invertert/charger … and it seems to reset the feed-in to working correctly… ( i hope )
Did you use the same file to import as exported? Would have entered it all manually myself.
indeed imported the same backup file … it had a warning, that the config would be changed to the multi plus II … so have worked with that…
maybe i will reset the MP II later this week and indeed start from 0 in the setup…
will test more the days that come.
Strange things happen. If there’s doubt. Reflash with veflash and manually enter settings again.