# Feature Request - Sensor Name in Notifications

**URL:** <https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642>\
**Category:** DIY\
**Tags:** rv, gx\_device, vrm, diy, feature-request\
**Created:** [14 January 2025 17:32 UTC](https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642 "2025-01-14T17:32:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vocoder](https://avatars.discourse-cdn.com/v4/letter/v/54ee81/32.png) [@Vocoder](https://community.victronenergy.com/u/Vocoder)\
**Post date:** [14 January 2025 17:32 UTC](https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642/1 "2025-01-14T17:32:19Z")

</div>

I recently installed 7 Mopeka tank sensors and 2 Ruuvi temperature sensors in my RV, and configured alarms for each one in VRM. When they trigger or reset, the notifications do not indicate which sensor has triggered (Only that a “Tank Level” alarm has changed state). Would be great if we could see the name of the sensor in the notifications. Thank you!

---

<div class="post-metadata">

**Author:** ![guystewart](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/guystewart/32/1_2.png) [@guystewart](https://community.victronenergy.com/u/guystewart)\
**Post date:** [15 January 2025 05:17 UTC](https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642/2 "2025-01-15T05:17:38Z")

</div>

Good suggestion, I’ll pass it on and see what can be done.

---

<div class="post-metadata">

**Author:** ![Vocoder](https://avatars.discourse-cdn.com/v4/letter/v/54ee81/32.png) [@Vocoder](https://community.victronenergy.com/u/Vocoder)\
**Post date:** [15 January 2025 18:24 UTC](https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642/3 "2025-01-15T18:24:40Z")

</div>

Fantastic. Thank you!

---

<div class="post-metadata">

**Author:** ![Vocoder](https://avatars.discourse-cdn.com/v4/letter/v/54ee81/32.png) [@Vocoder](https://community.victronenergy.com/u/Vocoder)\
**Post date:** [24 January 2025 23:30 UTC](https://community.victronenergy.com/t/feature-request-sensor-name-in-notifications/18642/4 "2025-01-24T23:30:29Z")

</div>

Also - An option to show/not show the installation name in the subject line and message/notification body would be an added bonus for those of us without more than one installation. 🙂