ESS 109kWh, 3 phase, center of the Netherlands

Show us your system
, , , , ,
21

@Peter.vanitegem Thnaks for sharing your ideas’ And I like your idea on Display and EMG switch. Do you have more pictuers how did you fix the display from back side/inside. it looks neat and clean. I know from Lynx shunt pin number 11 and 12 can be used for EMG but do not know it from CerboGX can you give some input please.

Thanks.

22

Ron,

Hereby a picture of de back

IMG_20260405_151741711
IMG_20260405_1517417111920×1080 336 KB

I used the “Victron Energy GX Touch 50 Flush Display” this is flatter version of the Touch 50 display.

The EMG is done by using the remote on/off of from the multiplus 2 inverter.

Regards

Peter

23

@Peter.vanitegem thanks. Nice work. Sorry I made you again to open and make pictures. I really appreciate your kindness.

I will have 3 inverters so I will make use of dry contact for emg switch.

Due to high price for victron displays, Lately I found that I could make use of tablet too. Which will be 40 to 50 euros.

Iam from south limburg, where do u buy all victron gears? Nkon is a good partner?

Cheers,
Ron

24

Ron,

I buy my victron equipment at

https://www.nkon.nl/

Regards

Peter