# Error processing function code 3

**URL:** <https://community.victronenergy.com/t/error-processing-function-code-3/17214>\
**Category:** Q&A and troubleshooting\
**Tags:** smartshunt, telecom, beginner\
**Created:** [1 January 2025 20:47 UTC](https://community.victronenergy.com/t/error-processing-function-code-3/17214 "2025-01-01T20:47:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mehh](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/mehh/32/12519_2.png) [@mehh](https://community.victronenergy.com/u/mehh)\
**Post date:** [1 January 2025 20:47 UTC](https://community.victronenergy.com/t/error-processing-function-code-3/17214/1 "2025-01-01T20:47:41Z")

</div>

When I try and connect via modbus it keeps on showing “Error processing function code 3”.

This is the full error if I SSH in "2025-01-01 20:31:35.888948500 ERROR “Error processing function code 3, unit id 247, start address 865, quantity 2, src 192.168.0.10: Error finding service with device type system at device instance 256”

I can not connect at all and this is very confusing because unit id 247 is “247 256 CCGX VE.Direct 1 port (ttyO0)” when I looked on the modbus spreedsheet

---

<div class="post-metadata">

**Author:** ![mehh](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/mehh/32/12519_2.png) [@mehh](https://community.victronenergy.com/u/mehh)\
**Post date:** [1 January 2025 21:00 UTC](https://community.victronenergy.com/t/error-processing-function-code-3/17214/3 "2025-01-01T21:00:13Z")

</div>

home assistant with the victron modbus hacs plugin. I have already tried using the build in modbus but it still gives the same error. Image is attached with the errors I’m getting the log file is so long that I have to scroll up like 5 or 8 times

 ![Screenshot_01-Jan_22-57-16_29297](https://europe1.discourse-cdn.com/victron/original/2X/6/6b6e8d21f27a81963afcf6b0dc1f620d66368abd.jpeg)
