# Enphase not in VRM

**URL:** <https://community.victronenergy.com/t/enphase-not-in-vrm/20023>\
**Category:** DIY\
**Tags:** enphase, energy\_meter, beginner, vrm, cerbo\_gx, offgrid, ess\
**Created:** [26 January 2025 13:03 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023 "2025-01-26T13:03:08Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![W\_ESS](https://avatars.discourse-cdn.com/v4/letter/w/94ad74/32.png) [@W\_ESS](https://community.victronenergy.com/u/W_ESS)\
**Post date:** [26 January 2025 13:03 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/1 "2025-01-26T13:03:08Z")

</div>

Hi,

Does anyone know how to get Enphase in the VRM portal.  
When I click on search for pv inverter VRM can’t find them.

Everything works fine and I am using a grid meter too measure the pv power.

I am just wondering if this is possible.

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [26 January 2025 13:07 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/2 "2025-01-26T13:07:41Z")

</div>

With a supported meter, and the meter role set correctly, it should appear as a tile on VRM.  
iirc Enphase isn’t natively supported, so the system will only know it is there if you have a meter configured correctly.  
Best to run through the PV inverter setup docs and the meter manual to find your bearings.

---

<div class="post-metadata">

**Author:** ![W\_ESS](https://avatars.discourse-cdn.com/v4/letter/w/94ad74/32.png) [@W\_ESS](https://community.victronenergy.com/u/W_ESS)\
**Post date:** [26 January 2025 13:11 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/3 "2025-01-26T13:11:37Z")

</div>

Thanks will keep looking 👀

👊🏻

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [26 January 2025 13:14 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/4 "2025-01-26T13:14:16Z")

</div>

Don’t forget to configure the frequency shifting, either via ESS (if on-grid and using ESS) or the PV inverter assistant.  
Have a start here:  
[https://professional.victronenergy.com/online-training/18/](https://professional.victronenergy.com/online-training/18/)  
Should equip you enough to be dangerous 😉

---

<div class="post-metadata">

**Author:** ![W\_ESS](https://avatars.discourse-cdn.com/v4/letter/w/94ad74/32.png) [@W\_ESS](https://community.victronenergy.com/u/W_ESS)\
**Post date:** [26 January 2025 13:30 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/5 "2025-01-26T13:30:31Z")

</div>

Thanks !!! But already did that 🤓

I was just wondering if enphase an Victron are on the same page.

If you use fronius or ap systems you should get a small visual in your VRM screen (seen that somewhere)

Maybe in the future…….

---

<div class="post-metadata">

**Author:** ![nickdb](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/nickdb/32/51440_2.png) [@nickdb](https://community.victronenergy.com/u/nickdb)\
**Post date:** [26 January 2025 13:37 UTC](https://community.victronenergy.com/t/enphase-not-in-vrm/20023/6 "2025-01-26T13:37:29Z")

</div>

The only ones with a native (modbus) integration are Fronius, and more recently SMA.  
Others will not be seen, but their power recorded via the meter, which will be displayed as a PV inverter on VRM, when the role and location is set.  
Beyond that, without writing your own drivers/integration, it will not be discovered on the GX like the other 2.