I have a setup with Multiplus II, 2 x MPTT, Pylontech, Cerbo. I take energy from the battery via Smartshunt (set to DC system) for water heating. DVVC control is set. Everything works, the need for the DC system is calculated and compensated. But the moment Pylontech reports 100% soc, the system stops compensating for the need for the DC system and the battery is discharged. It keeps going like this. See the graph. All the latest firmware. What could be wrong?
Hi. I complained about this some time ago. Never did find a fix… https://community.victronenergy.com/t/pylontech-charging-interrupted-by-dc-load/1303/13
