# Digital multi control

**URL:** <https://community.victronenergy.com/t/digital-multi-control/61792>\
**Category:** DIY\
**Tags:** multiplus-ii, professional, digital\_multi\_contro\
**Created:** [18 August 2026 07:42 UTC](https://community.victronenergy.com/t/digital-multi-control/61792 "2026-08-18T07:42:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![10101995](https://avatars.discourse-cdn.com/v4/letter/1/9fc348/32.png) [@10101995](https://community.victronenergy.com/u/10101995)\
**Post date:** [18 August 2026 07:42 UTC](https://community.victronenergy.com/t/digital-multi-control/61792/1 "2026-08-18T07:42:45Z")

</div>

Hi,

I have a MultiPlus-II PMP122505012 connected to a Digital Multi Control REC020005010 and I’m having a strange issue with the LEDs on the remote panel.

The MultiPlus itself seems to be working correctly, but the LEDs on the DMC don’t match what I see in VE.Configure.

For example, VE.Configure shows Mains On and Absorption, while on the REC020005010 I get Inverter On and Low Battery.

From what I can see on the Victron website, both REC020005010 and DMC000200010R are listed as compatible with MultiPlus-II. However, I noticed that the current datasheet of the PMP122505012 mentions the DMC000200010R.

So I’m wondering if the REC020005010 is actually compatible with this MultiPlus-II, or if I should use the DMC000200010R instead.

Has anyone seen this behaviour before? Could it simply be a configuration or connection issue, or is there something that needs to be changed/updated for the REC020005010?

I’ve attached a couple of pictures showing VE.Configure and the LEDs on the panel.

 ![Screenshot 2026-08-17 125046](https://europe1.discourse-cdn.com/victron/original/3X/e/7/e7438d7f4aac8e4d244d96791016a143dc3443e6.png)

 ![WhatsApp Image 2026-08-17 at 12.55.03 (1)](https://europe1.discourse-cdn.com/victron/original/3X/7/b/7bf7135544a4a4d707f60ad97751bbf9974bf1d6.jpeg)