# Cerbo GX V2 not obtaining a network gateway address - Unable to update OTA

**URL:** <https://community.victronenergy.com/t/cerbo-gx-v2-not-obtaining-a-network-gateway-address-unable-to-update-ota/50465>\
**Category:** Q&A and troubleshooting\
**Tags:** ethernet, cerbo\_gx, diy\
**Created:** [20 December 2025 13:56 UTC](https://community.victronenergy.com/t/cerbo-gx-v2-not-obtaining-a-network-gateway-address-unable-to-update-ota/50465 "2025-12-20T13:56:26Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![DirkW](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/dirkw/32/33865_2.png) [@DirkW](https://community.victronenergy.com/u/DirkW)\
**Post date:** [20 December 2025 15:35 UTC](https://community.victronenergy.com/t/cerbo-gx-v2-not-obtaining-a-network-gateway-address-unable-to-update-ota/50465/8 "2025-12-20T15:35:59Z")

</div>

Please type in 0.0.0.0 as Ethernet Gateway address

> [@VRM is not uploading when is conected to Garmin MDF](https://community.victronenergy.com/t/vrm-is-not-uploading-when-is-conected-to-garmin-mdf/43236/2):
>
> As you have the GX device ethernet port in use for a non internet connection such as energy meter, MFD and wifi connection for internet this might explain it and the solution. (Solution is to set gateway of the ethernet connection to 0.0.0.0)

---

_[View the full topic](https://community.victronenergy.com/t/cerbo-gx-v2-not-obtaining-a-network-gateway-address-unable-to-update-ota/50465)._