# Cerbo gx is only seeing 1 out of 4 EG4 lifepower4 batteries

**URL:** <https://community.victronenergy.com/t/cerbo-gx-is-only-seeing-1-out-of-4-eg4-lifepower4-batteries/37997>\
**Category:** DIY\
**Tags:** beginner, cerbo\_gx, lithium\_battery\
**Created:** [2 July 2025 02:31 UTC](https://community.victronenergy.com/t/cerbo-gx-is-only-seeing-1-out-of-4-eg4-lifepower4-batteries/37997 "2025-07-02T02:31:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bustinoutskoolie](https://avatars.discourse-cdn.com/v4/letter/b/d26b3c/32.png) [@Bustinoutskoolie](https://community.victronenergy.com/u/Bustinoutskoolie)\
**Post date:** [2 July 2025 02:31 UTC](https://community.victronenergy.com/t/cerbo-gx-is-only-seeing-1-out-of-4-eg4-lifepower4-batteries/37997/1 "2025-07-02T02:31:02Z")

</div>

My Cerbo gx is only seeing 1 out of 4 EG4 lifepower4 batteries. I have the Victron pin out cable, and just will not read the other batteries on the screen. It’s only showing one battery. I’m thinking it must be a setting that I need to change. Can anybody assist?

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [2 July 2025 06:54 UTC](https://community.victronenergy.com/t/cerbo-gx-is-only-seeing-1-out-of-4-eg4-lifepower4-batteries/37997/2 "2025-07-02T06:54:50Z")

</div>

Possibly.  
I ma assuming you have them daisy chained with their own comms cables.  
Do the batteries have a dip address system? Set those.