# Cannot see Cerbo GX mkII data on Victron App on Raymarine MFD

**URL:** <https://community.victronenergy.com/t/cannot-see-cerbo-gx-mkii-data-on-victron-app-on-raymarine-mfd/29755>\
**Category:** Q&A and troubleshooting\
**Tags:** raymarine, marine, victron\_community, cerbo\_gx, diy\
**Created:** [22 April 2025 18:42 UTC](https://community.victronenergy.com/t/cannot-see-cerbo-gx-mkii-data-on-victron-app-on-raymarine-mfd/29755 "2025-04-22T18:42:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SVValhalla](https://avatars.discourse-cdn.com/v4/letter/s/b782af/32.png) [@SVValhalla](https://community.victronenergy.com/u/SVValhalla)\
**Post date:** [22 April 2025 18:42 UTC](https://community.victronenergy.com/t/cannot-see-cerbo-gx-mkii-data-on-victron-app-on-raymarine-mfd/29755/1 "2025-04-22T18:42:41Z")

</div>

Brain trust,

Any help on resolving this issue is appreciated. I connected my Cerbo GX with my Raymarine Axiom 12 using a direct connection via Ethernet cable. After turning the Axiom on, the Victron app appeared and the data was displayed. All good.  
I open the app yesterday and no data exists. I have attached a picture of the output. While troubleshooting, the Raymarine network sees the Cerbo IP address (port 0). Any thoughts on this? Thanks in advance.

 ![image](https://europe1.discourse-cdn.com/victron/original/3X/6/3/63a3ca8ff08ae21d83e11bf72c96fd520d7f6d38.jpeg)  
 ![image](https://europe1.discourse-cdn.com/victron/original/3X/5/9/5940b70613f713dc51621559b9754cd62d7a20f6.jpeg)