# Boat electric motor parameter display \[feature request\]

**URL:** <https://community.victronenergy.com/t/boat-electric-motor-parameter-display-feature-request/31773>\
**Category:** DIY\
**Tags:** expert, gx\_device, marine, vrm, feature-request\
**Created:** [10 May 2025 14:31 UTC](https://community.victronenergy.com/t/boat-electric-motor-parameter-display-feature-request/31773 "2025-05-10T14:31:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![iand](https://avatars.discourse-cdn.com/v4/letter/i/f05b48/32.png) [@iand](https://community.victronenergy.com/u/iand)\
**Post date:** [10 May 2025 14:31 UTC](https://community.victronenergy.com/t/boat-electric-motor-parameter-display-feature-request/31773/1 "2025-05-10T14:31:13Z")

</div>

Is there any plan to make CANBUS data from electric motors/controllers (e.g. Sevcon) visible on the screen/VRM, for example power/rpm (or voltage/current/torque/temperature…)? Especially now there’s a boat page appearing, and there are more and more electric/hybrid boats out there…

(and cars, since that was also mentioned a a reason for using mph for speed…)