# Bluesmart IP65 + AGM60L-DIN - recommended charging mode

**URL:** <https://community.victronenergy.com/t/bluesmart-ip65-agm60l-din-recommended-charging-mode/59047>\
**Category:** Q&A and troubleshooting\
**Tags:** bluesmart\_ip65, beginner\
**Created:** [9 June 2026 07:42 UTC](https://community.victronenergy.com/t/bluesmart-ip65-agm60l-din-recommended-charging-mode/59047 "2026-06-09T07:42:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![NemoAZ](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@NemoAZ](https://community.victronenergy.com/u/NemoAZ)\
**Post date:** [9 June 2026 07:42 UTC](https://community.victronenergy.com/t/bluesmart-ip65-agm60l-din-recommended-charging-mode/59047/1 "2026-06-09T07:42:02Z")

</div>

I have a Blue Smart IP65 12V/10A charger. I use it to charge an AGM60L-DIN (12V) 60Ah/640A battery, and I’m currently using the factory-set ‘Normal’ mode. I’ve recently come across the suggestion that the ‘High’ mode is actually the correct one. Could you please advise which setting is appropriate for my battery?