# BlueSmart IP65 12/15 - firmware update - activate Power Supply mode on long press "mode" button

**URL:** <https://community.victronenergy.com/t/bluesmart-ip65-12-15-firmware-update-activate-power-supply-mode-on-long-press-mode-button/50324>\
**Category:** Q&A and troubleshooting\
**Tags:** lead-acid, agm\_battery, vehicles, beginner\
**Created:** [17 December 2025 10:37 UTC](https://community.victronenergy.com/t/bluesmart-ip65-12-15-firmware-update-activate-power-supply-mode-on-long-press-mode-button/50324 "2025-12-17T10:37:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![BlueSmart](https://avatars.discourse-cdn.com/v4/letter/b/aca169/32.png) [@BlueSmart](https://community.victronenergy.com/u/BlueSmart)\
**Post date:** [17 December 2025 10:37 UTC](https://community.victronenergy.com/t/bluesmart-ip65-12-15-firmware-update-activate-power-supply-mode-on-long-press-mode-button/50324/1 "2025-12-17T10:37:39Z")

</div>

Hello,

Question for Victron developers ?

New Victron user here.  
Just noticed at there is no possibility to active PowerSupply mode via “mode” button, only via bluetooth.

Is there any chance to implement in some of the next firmware updates possibility to:

1. activates activation Power Supply mode on long press “mode” button (maybe 10s) or  
2. rapid short presses on “mode” button (maybe 5x or 7x) ?  
3. some other combination ?