# Blue smart charger questions

**URL:** <https://community.victronenergy.com/t/blue-smart-charger-questions/58082>\
**Category:** DIY\
**Tags:** bluesmart\_ip22, beginner\
**Created:** [17 May 2026 15:25 UTC](https://community.victronenergy.com/t/blue-smart-charger-questions/58082 "2026-05-17T15:25:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trinibob](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@Trinibob](https://community.victronenergy.com/u/Trinibob)\
**Post date:** [17 May 2026 15:25 UTC](https://community.victronenergy.com/t/blue-smart-charger-questions/58082/1 "2026-05-17T15:25:30Z")

</div>

Good morning I have a couple of questions regarding this particular charger mounted in a travel trailer charging a 300 amp power Victron battery that I am told is a different chemical configuration than normal lithium batteries lop04?

I would show you a picture of the charging faults, but I’m not sure how to use this form properly. Looks like it went through 10 cycles before it fully charged the battery with several faults like being shut off. I do have it on lithium, but I’m being told that there may be a Advanced setting I could change it to configure it to that particular type of Battery any information or help would be greatly appreciated.

 ![IMG_8378](https://europe1.discourse-cdn.com/victron/original/3X/5/9/59258e7925af7f98b328217d94f2711be4033ad6.jpeg)

 ![IMG_8422](https://europe1.discourse-cdn.com/victron/original/3X/1/b/1b3bc7ecca1165c2800b0c6df920d2c9368d3194.jpeg)

 ![IMG_8428](https://europe1.discourse-cdn.com/victron/original/3X/0/1/01e5281e03352cec81b51bec3748288063a7f29d.png)

 ![IMG_8420](https://europe1.discourse-cdn.com/victron/original/3X/2/7/27dbbb6037b5646a5998d1aed72e307959dc24f4.png)

 ![IMG_8442](https://europe1.discourse-cdn.com/victron/original/3X/5/a/5a8b0e3ae8e361dc82c8872f76d03d1734315730.png)

 ![IMG_8449](https://europe1.discourse-cdn.com/victron/original/3X/a/a/aa2514e61db983c295b519585860270b5ed8f360.jpeg)

 ![IMG_8446](https://europe1.discourse-cdn.com/victron/original/3X/8/e/8e1c246a31c6abccf4b08bd3e3ad7219f7742bb8.jpeg)

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [17 May 2026 16:00 UTC](https://community.victronenergy.com/t/blue-smart-charger-questions/58082/2 "2026-05-17T16:00:30Z")

</div>

> [@Trinibob](#):
>
> Victron battery that I am told is a different chemical configuration than normal lithium batteries lop04?

Not a different chemistry per say.  
But possibly a different target voltage.

> **[8.2. Expert mode settings - 8. Advanced Configuration](https://www.victronenergy.com/media/pg/Blue_Smart_IP22_Charger_230V_manual/en/advanced-configuration---bsc---psc.html#UUID-b2f74019-ae5c-2c43-cb46-65097d29a505)**
>
> In specific use cases where the integrated charge modes are not suitable/ideal for the battery type being charged, or the battery manufacturer recommends specific charge parameters and fine tuning is desired, advanced configuration is possible using...

You might have to create a custom preset with slightly different voltages