# Battery percentage not visible **URL:** \ **Category:** Q&A and troubleshooting\ **Tags:** mppt, multiplus\_2\_gx, pylontech, victron\_community, offgrid, diy\ **Created:** [10 January 2025 09:24 UTC](https://community.victronenergy.com/t/battery-percentage-not-visible/18201 "2025-01-10T09:24:01Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Netrange](https://avatars.discourse-cdn.com/v4/letter/n/7ab992/32.png) [@Netrange](https://community.victronenergy.com/u/Netrange)\ **Post date:** [10 January 2025 18:48 UTC](https://community.victronenergy.com/t/battery-percentage-not-visible/18201/5 "2025-01-10T18:48:15Z")
CAN Bus configured in the GX Device / Remote Console ? > [@Multiplus II GX with Pylontech US5000 connection problem](https://community.victronenergy.com/t/multiplus-ii-gx-with-pylontech-us5000-connection-problem/16514/5): > > or you can quickly build your own to test … - Resisitor ! blue cable the right way round … BMS CAN A is correct … Pylontechs started properly TOGETHER ? and fully charge once so that the status is transmitted to the system at 100%. Simply set to ‘Keep batteries charged’… --- _[View the full topic](https://community.victronenergy.com/t/battery-percentage-not-visible/18201)._