# Batrium trips the MCB at 39% SOC

**URL:** <https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289>\
**Category:** Modifications\
**Tags:** multiplus, diy\
**Created:** [18 November 2026 13:22 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289 "2026-11-18T13:22:06Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zen](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/zen/32/6663_2.png) [@Zen](https://community.victronenergy.com/u/Zen)\
**Post date:** [18 November 2026 13:22 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/1 "2026-11-18T13:22:06Z")

</div>

My Batrium trips the MCB at 39% SoC. There are still 49 volts overall and 3.063 volts per cell left. So the voltage is okay. But in terms of SoC, it seems wrong. Any ideas?

---

<div class="post-metadata">

**Author:** ![Netrange](https://avatars.discourse-cdn.com/v4/letter/n/7ab992/32.png) [@Netrange](https://community.victronenergy.com/u/Netrange)\
**Post date:** [18 November 2026 15:14 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/2 "2026-11-18T15:14:05Z")

</div>

What’s supposed to be wrong or right about that? The MCB has absolutely nothing to do with the SOC. What is the MCB responsible for in your setup? …

---

<div class="post-metadata">

**Author:** ![Zen](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/zen/32/6663_2.png) [@Zen](https://community.victronenergy.com/u/Zen)\
**Post date:** [19 November 2026 08:41 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/3 "2026-11-19T08:41:22Z")

</div>

Yeah, the question doesn’t belong in the Show Your System section. Sorry.

---

<div class="post-metadata">

**Author:** ![Meine\_Energiewende](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/meine_energiewende/32/3641_2.png) [@Meine\_Energiewende](https://community.victronenergy.com/u/Meine_Energiewende)\
**Post date:** [19 November 2026 09:15 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/4 "2026-11-19T09:15:01Z")

</div>

3

> [@Zen](#):
>
> 3,063 Vol

That is damn low. It is correct for the MCB to trip (at least with the default Batrium configuration).

If the system deviates that much, then either you have configured something incorrectly in the shunt or entered the total capacity incorrectly. The Batrium shunt is highly accurate and there is little deviation. The only exception is if you haven’t fully charged for several months.

Conclusion: Check the configuration.

---

<div class="post-metadata">

**Author:** ![lxonline](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/lxonline/32/25567_2.png) [@lxonline](https://community.victronenergy.com/u/lxonline)\
**Post date:** [19 November 2026 09:16 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/5 "2026-11-19T09:16:20Z")

</div>

It’s ok. I moved it to DIY. You are all good here

---

<div class="post-metadata">

**Author:** ![Zen](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/zen/32/6663_2.png) [@Zen](https://community.victronenergy.com/u/Zen)\
**Post date:** [19 November 2026 11:25 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/6 "2026-11-19T11:25:49Z")

</div>

Hello Jens,

Thank you very much for your reply.

I know Batrium’s software and app. I’m less familiar with the configuration. This has been causing me problems for weeks. What do I need to change, and where, so that the SOC is around 10% at 49 volts? And not 39% SOC.

Kind regards,

Zen

---

<div class="post-metadata">

**Author:** ![Meine\_Energiewende](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/meine_energiewende/32/3641_2.png) [@Meine\_Energiewende](https://community.victronenergy.com/u/Meine_Energiewende)\
**Post date:** [19 November 2026 12:34 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/7 "2026-11-19T12:34:35Z")

</div>

I can’t answer that with 100% certainty. Quite a bit of information is needed: which cells, how many, what charge/discharge rates, and screenshots of the current settings.

---

<div class="post-metadata">

**Author:** ![Zen](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/zen/32/6663_2.png) [@Zen](https://community.victronenergy.com/u/Zen)\
**Post date:** [19 November 2026 14:36 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/8 "2026-11-19T14:36:52Z")

</div>

Lf280k, 48 cells configured as 16s3p. I’m not exactly sure what the charge and discharge rates are. And I’ll send you as many photos as you like, once I know which ones you need.

 ![IMG_1445](https://europe1.discourse-cdn.com/victron/original/3X/a/4/a476bc34d66a3fa5a27c2f945607b98589392df0.jpeg)

 ![IMG_1446](https://europe1.discourse-cdn.com/victron/original/3X/0/b/0b8a76ca11217d180b90e2c0b658f56394d05b78.jpeg)

 ![IMG_1447](https://europe1.discourse-cdn.com/victron/original/3X/8/9/8934ca81050c5907fbb7a8e51f232ced326f3e58.jpeg)

---

<div class="post-metadata">

**Author:** ![Sean](https://avatars.discourse-cdn.com/v4/letter/s/f0a364/32.png) [@Sean](https://community.victronenergy.com/u/Sean)\
**Post date:** [19 November 2026 15:08 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/9 "2026-11-19T15:08:20Z")

</div>

Why not ask on the Batrium forum ?

---

<div class="post-metadata">

**Author:** ![Zen](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/zen/32/6663_2.png) [@Zen](https://community.victronenergy.com/u/Zen)\
**Post date:** [19 November 2026 15:21 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/10 "2026-11-19T15:21:39Z")

</div>

Good idea,

I didn’t know there was a dedicated Batrium forum.

Thanks

---

<div class="post-metadata">

**Author:** ![Sean](https://avatars.discourse-cdn.com/v4/letter/s/f0a364/32.png) [@Sean](https://community.victronenergy.com/u/Sean)\
**Post date:** [19 November 2026 17:58 UTC](https://community.victronenergy.com/t/batrium-lost-bei-39-soc-den-mcb-aus/65289/11 "2026-11-19T17:58:10Z")

</div>

It’s not exactly busy on their, and James will likely offer a (paid for) remote “consultation”
