# Alguien sabe para instalar verticalmente un inversor V.E. direct 12/1600

**URL:** <https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899>\
**Category:** DIY\
**Tags:** phoenix\_inverter\
**Created:** [5 June 2026 07:23 UTC](https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899 "2026-06-05T07:23:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![J.Carlos](https://avatars.discourse-cdn.com/v4/letter/j/b38774/32.png) [@J.Carlos](https://community.victronenergy.com/u/J.Carlos)\
**Post date:** [5 June 2026 07:23 UTC](https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899/1 "2026-06-05T07:23:46Z")

</div>

En las instrucciones no queda claro su posición, ya que solo indica que para instalarlo verticalmente, el ventilador tiene que estar ubicado en la pate baja. pero este inversor, el ventilador está ubicado en el centro del inversor, entre el disipador y el transformador

---

<div class="post-metadata">

**Author:** ![MikeD](https://dub1.discourse-cdn.com/victron/user_avatar/community.victronenergy.com/miked/32/1522_2.png) [@MikeD](https://community.victronenergy.com/u/MikeD)\
**Post date:** [5 June 2026 19:30 UTC](https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899/2 "2026-06-05T19:30:57Z")

</div>

Install with the connection panel at the bottom,as shown in appendix G of the manual.

---

<div class="post-metadata">

**Author:** ![J.Carlos](https://avatars.discourse-cdn.com/v4/letter/j/b38774/32.png) [@J.Carlos](https://community.victronenergy.com/u/J.Carlos)\
**Post date:** [6 June 2026 10:30 UTC](https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899/3 "2026-06-06T10:30:49Z")

</div>

ok. muchas gracias

---

<div class="post-metadata">

**Author:** ![JuanAl](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@JuanAl](https://community.victronenergy.com/u/JuanAl)\
**Post date:** [12 June 2026 05:36 UTC](https://community.victronenergy.com/t/alguien-sabe-para-instalar-verticalmente-un-inversor-v-e-direct-12-1600/58899/4 "2026-06-12T05:36:48Z")

</div>

Buenos días,

Sí se puede instalar en vertical, pero perderá rendimiento al no poderse realizar la refrigeración de la forma adecuada.