Accuracy of the VRM app figures?

Are the consumption figures in the VRM app known to be accurate? The Victron app shows an average of about 1.2 units a day from the grid. However, the electricity meter shows an average consumption of 3.42 a day. Big difference! 3.42 looks suspiciously close to the total consumption, that is solar plus grid. According to the electricity meter, we have used 613.31 between 19th April and today. If i check the same period on the app it says only 344 from the grid. (This is a house that’s not been occupied during that period, and very little is switched on, hence a low consumption) So (please pardon my stupidity in such things!) it seems to me that either the app is wildly inaccurate, or the electricity meter is faulty.

Is this a single phase or three phase system?

Single phase, everyday house system.

Interesting.

It does largely depend on power factor and how the meter handles it as well. But there eis something else.

Mine for example also counts the overshoot feedback as consumption (I get charged for it)

So maybe check if it is the addition of grid feedback and consumption

Thanks - that is, of course double Dutch to me. :slight_smile: I’m returning to the house in a couple of weeks, will investigate further then.

The screen you showed was under installation data consumption from the drop down.
Under system overview you will see a bit of feedback if there is