1 copy the DTB file over from here https://github.com/aaronsb/victronvenussupport/blob/master/mcp3208-overlay.dtb and save into /u-boot/overlays on the RPI. -> OK done 2 add line: dtoverlay=mcp3208:spi0-0-present to file /u-boot/config.txt -> OK done 3 opkg install kernel-module-mcp320x -> got message: No packages installed or removed. => opkg list-installed pointed out that kernel-module-mcp320x-4.9.80 was already installed. 4 Rebooted 5 copy manually contents of dbus-adc.zip to /opt/victronenergy correct path should be /opt/victronenergy/dbus-adc not /opt/victronenergy/dbus-adc/dbus-adc! 6 chmod 755 /opt/victronenergy/dbus-adc/start-adc.sh -> OK chmod 755 /opt/victronenergy/dbus-adc/dbus-adc -> OK chmod 755 /opt/victronenergy/dbus-adc/service/run -> OK chmod 755 /opt/victronenergy/dbus-adc/log/run -> Path seems to be wrong changed to /opt/victronenergy/dbus-adc/service/log/run => OK! touch /var/log/dbus-adc -> OK ln -s /opt/victronenergy/dbus-adc/service /service/dbus-adc -> OK 7 Reboot 8 Various tanks are now reported on the "Mobile Page" and 5 new items appeared in the Device List.