device_tree_address=0x00000100
kernel=u-boot.bin


[pi2]
device_tree=bcm2709-rpi-2-b.dtb

[pi3]
device_tree=bcm2710-rpi-3-b.dtb
[pi3+]

device_tree=bcm2710-rpi-3-b-plus.dtb

dtoverlay=pi3-miniuart-bt


framebuffer_width=800
framebuffer_height=480
[all]

dtparam=spi=on
//dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25,spimaxfrequency=500000 //Need to stop if using and conflicking with other SPI ports with USB canbus etc
dtoverlay=spi-bcm2835-overlay  //remove -overlay not required works OK without it

dtparam=i2c_arm=on

dtparam=i2s=on

//lcd_rotate=2   // Screen rotation depending on enclosure

# dtoverlay=mcp3208:spi0-0-present,i2c-rtc,ds1307-rtc //not required for stetson
dtoverlay=mcp3208:spi0-0-present

# dtoverlay=i2c-gpio                          //not required for stetson
# dtoverlay=mcp23017,gpiopin=1  //not required for stetson